Posts: 533
Threads: 48
Joined: Dec 2005
Reputation:
0
So I'm trying to learn more about setup and not worry so much about winning right now or makeing the A main but to have a consistant car, and was wondering if some of you guys could help me figure out what is the proper way or the way of choosing the right clutch shoes and springs for the track conditions.
"I'm always amazed to hear of air crash victims so badly mutilated that they have to be identified by their dental records. What I can't understand is, if they don't know who you are, how do they know who your dentist is?"
Posts: 13,431
Threads: 106
Joined: Nov 2005
Reputation:
0
Well alot depends on the motor, the car, and your driving style. Most MFG dont leave much room for adjustment with the clutches which is why i run the M2C racing setup. Generally the stiffer the spring the later the engagement which will give you more snap on the bottom end. A heavier shoe will engage sooner giving you softer bottom end. And material wise a hard shoe will generally slip a bit before it fully grabs which will give you a later but usually smoother engagement. Thats just the tip of the ice berg really. With the M2C stuff you can chose b/w springs from like .9 - 1.1 in increments of .05. Shoes come in 3 different materials and 3 different weights as well
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT
alute:
Bringing old know-it-all blow hards back to reallity at a forum near you
"Always Imitated, Never Duplicated"
Posts: 533
Threads: 48
Joined: Dec 2005
Reputation:
0
thanks mike, what kind of setup are you running in you RC8 that is what I'm running now and just looking for springs and shoes for it right now. I was looking into the M2C stuff but they have so much I kind of get confused of what it is that I'm really looking for. If you could point me in the right direction for there stuff for like 3 different sets of shoes that I should have on hand from high bite to some fluf that would be awsome man.
"I'm always amazed to hear of air crash victims so badly mutilated that they have to be identified by their dental records. What I can't understand is, if they don't know who you are, how do they know who your dentist is?"
Posts: 13,431
Threads: 106
Joined: Nov 2005
Reputation:
0
Well I usually dont run anything but the hard shoes; they last forever and u can tune the rest by weight and springs. I usually run hard lites with .95's. I would keep a set of hard lites and ultra lites along with springs from .9-1.1 The softer shoes i never really liked much they engage real early but seem to wear too fast. I run the 4 shoe but the 3 is just as good. High bite i would run like the ultra lights with 1.0's or 1.05's MAYBE 1.1's if u need more snap loamy id go with 2 .9's with a .95 with the light shoes or even the reg weight but i usually dont run them. I pretty much ran the light hards with 2 .9's and 2 .95's outdoor every where last year outdoor and it was great
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT
alute:
Bringing old know-it-all blow hards back to reallity at a forum near you
"Always Imitated, Never Duplicated"
Posts: 533
Threads: 48
Joined: Dec 2005
Reputation:
0
cool thanks man how do you run the 4 shoe is it a different flywheel that you put on there and if so what one is it?
"I'm always amazed to hear of air crash victims so badly mutilated that they have to be identified by their dental records. What I can't understand is, if they don't know who you are, how do they know who your dentist is?"
Posts: 533
Threads: 48
Joined: Dec 2005
Reputation:
0
never mind I see they have a 4 shoe setup.
"I'm always amazed to hear of air crash victims so badly mutilated that they have to be identified by their dental records. What I can't understand is, if they don't know who you are, how do they know who your dentist is?"
Posts: 13,431
Threads: 106
Joined: Nov 2005
Reputation:
0
ya its a different flywheel, there own. You really get alot more snap out of it so with the way the RC8 accelerates i dunno how well it would do outdoor, im gonna run it might have to gear up the CB
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT
alute:
Bringing old know-it-all blow hards back to reallity at a forum near you
"Always Imitated, Never Duplicated"