Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Truggy
#1
[Image: mantistruggy1bz9.jpg]
[Image: mantistruggy2lg5.jpg]
[Image: mantistruggy3zm5.jpg]
Robitronic is proud to announce the release of the Mantis RTR 1/8th scale racing truggy. The Mantis truggy was designed to meet the needs of all levels from beginner to racer. The Mantis truggy was made to be ultra durable on the track, easy to handle and maintain. Features like floating gearboxes, a sealed center gearbox, all the suspension and tuning options you will ever need, and a powerful Axial 4.6 big block help set this truggy apart from the rest of the pack. Use of new materials and intelligent design ensure that this truggy is built to last and capable of competing on the track. Mantis – the new name in 1/8th scale off road.

Ready-to-Run
The Mantis comes pre-built, with factory driver set-up, multi-color printed body, and includes an AM radio system with a high torque steering servo and a mini-receiver. The tires are pre-glued on lightweight dish wheels. The kit includes all Allen wrenches, a multi socket wrench, glow-plug igniter, and a 500cc fuel bottle, the only thing left to buy is batteries and fuel!

Features:
3mm Aluminum Chassis
Aluminum Upper Deck
4WD Shaft-Drive
Powerful Axial .28 Spec 1s Pull Start Engine
Adjustable Suspension
Fully Sealed Bearings
Aluminum Shocks with 3mm shock shaft and 14mm piston
Aluminum Shock Towers
Composite Suspension Arms
Polished Tuned Exhaust Pipe
Sealed Receiver Box
Sealed Center Gear Box
Two Stage Air Filter
Exclusive Ultra Low Diff design for lower center of gravity
4 Bevel Gear Differentials
Unique Braking System with Dual Brake Disk
Rubber dampened hinge pin pivot points for better bump absorbsion and increased durability
Thick composite chassis braces front & rear
High-tech Radio System with hi-torque steering servo
Laydown Steering Servo
Axial Terra-izer Tires
Lightweight Axial Dish Wheels
Low profile Axial Mantis body
Fully printed, decaled and trimmed body
Floating front and rear differentials
Universal Joints all around
Axial Fuel filter with fuel tube holder
5 cell 1100mAh receiver battery pack with trickle charger
150cc fuel tank with built in splash guard and drain
Fuel Bottle
Glow Plug Igniter
Cross Wrench
Convenient carry handled box
All you need is fuel and AA batteries and you are ready to go.




Big block power
The Axial 4.6 big block engine is extremely powerful. With a super-size heat-sink you will never have issues with high temperatures and overheating. A high-flow dual stage air filter protects the engine from contamination. Tuning and adjustments are simple and you can have this truggy up and performing in a short amount of time. The engine is equipped with a pull start system, so no need for an expensive starter box. The polished tuned pipe is very lightweight and has been tuned to the engine for maximum power. Axial is an established name in the marketplace so support is only a call away if needed.

Handling
The Mantis chassis was designed for an ultra low center of gravity, to be lightweight and have maximum suspension travel. The result is a very easy handling chassis right out of the box and with all the options for setup you can fine tune it to your driving style and track conditions. Long oil-filled 14mm piston aluminum shocks with 3.5mm shafts and super strong composite suspension arms let the car fly over bumps and jumps. The heavy duty aluminum shock towers are strong and allow multiple shock positions for further tuning. All the suspension pins are supported in rubber bushings; this elastic connection avoids damage to the suspension during severe use. The Mantis has three low profile differentials all with a 6 hardened metal gears. The aluminum-top deck is ultra low further adding to the low center of gravity. The Axial Mantis body is low for maximum air flow around the engine. All this adds up to a strong performing chassis with performances advantages you can feel right out of the box.

Fully Adjustable
The Mantis offers a wide range of tuning adjustments so that you can fine tune your truggy to any driving condition. All important suspension points are easily adjustable.

36 possible shock positions available to fine tune your suspension.
Spring-clips for adjustment of ride height.
Adjustable front and rear camber
Adjustable steering geometry.
Front inboard toe angle adjustments: 0º to -2 º
Rear inboard toe angle adjustments: 0º to -2 º
Front kick up angle adjustments: 0º to 2 º
Rear anti dive angle adjustments: 0º to 2 º


Mantis Specifications:
Wheelbase 362~368mm
Track 380mm
Total length 550mm
Total Width 415mm
Total Height 190mm
Fuel tank 150cc

Performance Features
Single speed transmission for maximum performance at the track with the Axial 4.6 big block engine
6 gear hardened metal differentials
Lightweight chassis and components for optimum agility and handling
Adjustable steering geometry
Sway bars included for front and rear
Vented steel disk brakes for maximum breaking
Super low aluminum upper deck and low mounted components
Low profile differentials
Aerodynamic body for high speed and good airflow
Clean chassis bottom with countersunk screws and seamless transition to the chassis side-guard
Full set of universal joints (front, rear, center front, and center rear)
Axial Fuel Filter
Durability Features
All gears in drive train are hardened steel
Super-durable suspension and shock towers
Long composite shocks with diaphragms
17mm Wheel Hex Hubs
Fully closed drive-train
Additional Features
Wire routing for servo leads and receiver
150cc fuel tank with splash guard and drain
Included transponder mount, allows use of all AMB transponders
Dust-sealed receiver/battery-box.
#R39071 - Mantis 1/8 Truggy RTR - $775.00

http://www.robitronic-usa.com/

http://www.the-rc-zone.com
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#2
I think I have seen an ad for this in a mag last month. They have a Buggy too I think. This does look sweet,maybe I bought the ST-1 to soon!?
Myspace.com/Mtdrew24
Reply
#3
paul coleman said that thing is a turd! lol and he is sponsored by them ahahah
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#4
What is so bad about it.
Myspace.com/Mtdrew24
Reply
#5
he said it handles like garbage i guess.
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#6
Well it is new. There will be upgrades. I doubt it will be as bad as he says it is.
Myspace.com/Mtdrew24
Reply
#7
Paul coleman has really slid down the ladder when it comes to sponsors!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#8
I knew he was with Ofna,and I heard he was gone and went somewhere else. But can his word be taken as to how this truggy is going to be? I have not heard much about him so I would have to take your word for it as far as how far he has fallen.
Myspace.com/Mtdrew24
Reply
#9
Dude.. Seriously, its made my robotronics ! It cheap entry level crap
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#10
I saw it on rc-zone and it said "Hellfires new opponent" I didn't really think it was any good, but what the heck.
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#11
Although the name might sound that way. I never heard of them.
Myspace.com/Mtdrew24
Reply
#12
Robo who???

More proprietary crud
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen


NTC3 RTR assoc .15
NTC3 OS .18

Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Jammin CRT.5 Minni Truggy? Agd123 5 2,639 08-06-2008, 09:05 AM
Last Post: Tex
  Revo, a race truggy? snoracer 61 11,895 02-13-2008, 05:27 PM
Last Post: J-Dub
  Indoor Tires. Truggy, Boas And Holeshots? or just Boa J-Dub 9 2,513 01-15-2008, 01:02 PM
Last Post: J-Dub
  $300 rtr truggy for the beginners. DAVEC-NITRO-RS4 5 2,140 10-21-2007, 09:45 PM
Last Post: rocco79
  Possible AE truggy? Evil3 94 11,141 08-14-2007, 11:31 PM
Last Post: J-Dub
  Which tires for Truggy outdoor? motoxer4life 23 4,803 08-06-2007, 03:29 PM
Last Post: motoxer4life
  What truggy as a basher? motoxer4life 198 26,963 07-19-2007, 08:21 AM
Last Post: motoxer4life
  The 8 Truggy's R Out, SLOW REVO 125 15,225 03-14-2007, 06:33 PM
Last Post: FreeRideFrosty
  decent entry level truggy AddictedtoNITRO 55 7,741 02-25-2007, 04:45 PM
Last Post: AddictedtoNITRO
  ofna orange/yellow molded truggy foams pwnzor 16 2,644 02-04-2007, 04:20 PM
Last Post: kevinF

Forum Jump:


Users browsing this thread: 1 Guest(s)