Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
hellfire, what engine?
#1
I'm getting a hellfire for a sweet deal... I don't wanna hear that I'm not going to win races, cause guess what, I haven't raced since '96 at LH and probably won't anytime soon... (yeah, I've read each thread on this forum about the hellfire)


so, with that said, the engine is shot, what should I put in it to bash with?
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#2
Cheap route would be like an Axial .28 Pullstart. they are torquey unsure of engine life.
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#3
I was actually thinking OS 21VG, I had one in the jammin' buggy Roc sold me and it was pretty bad assed! shoot, I'd rather have torque than high end to bash with..
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#4
Ttr .28 for $115.
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
#5
On a budget....one of the Axials, we've had plenty of people happy with those motors.

Don't care much about money spent........HPI K5.9! IIRC it's 3.75hp @ 39,900:drool:

Best part is that you should be able to use the carb and pull start parts off your original HPI 4.6SS H.O. for any of the three enginesBig Grin If I didn't know any better, I'd swear that the same factory made the HPI 4.6SS/4.6SS H.O./K5.9, Axial .28/.32, and Racer's Edge .32Wink
Reply
#6
all those big blocks and over .28 motors wont even compare to the power you could get out of a race .21 or race .28 not to mention life span. All those HP ratings are bullshit
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#7
He's not looking for a race motor Mike...........
Reply
#8
Czech, race motors are a bit more finicky and besides that would be overkill for a basher Rolleyes

I shouldn't need to upgrade the drivetrain should I? I don't even think he's ever blown a diff out in it (my Mom drove it a lot... few miles, little ol' lady driven, lol)

geez, BJoe, isn't 3.75 hp a bit overkill? lmao....
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#9
os 21vg
The worst dirtbiker is always one step ahead of even the best quad rider....

Tex Wrote:WTF, racing ranger 2?????? and racing ranger 1???? #2 needs his ass kicked for taking someone elses name.
Reply
#10
Race motors arent any more finicky than any other motors. Anyone ever heard of a vspec...Im just saying dont waste your money on some POS RTR motor that has great HP ratings
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#11
axial .28rr. i have one in my mantis (just like the hell fire) and it screams!
10/8/1871- the great Chicago fire. Approximately 250 people were killed in the fire; 98,500 people were left homeless; 17,450 buildings were destroyed along with the original Emancipation Proclamation.
Chicago Local 281, protecting lives and property for over 100 years.
Lawn sprinklers save your grass, Fire sprinklers save your a$$
Reply
#12
lol If I was a basher I sure as hell wouldnt waste my money on a 300 dollar engine. just get a surefire 32 or an axial .28 and you'll be straight. either that or the 30vg, instead of the 21vg. it'll be more your style i will assume
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#13
Czech-it-Out Graphics Wrote:Race motors arent any more finicky than any other motors. Anyone ever heard of a vspec...Im just saying dont waste your money on some POS RTR motor that has great HP ratings

you're not even a basher! what are you doing in this thread spewing your race motor crap? leave now, thank you...
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#14
thanks guys, I'll check out those Axials or maybe that OS21, I'm honestly not sure which way I'll go, but I've got choices....

does Scotty carry the axials at the shop?
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#15
stratcat Wrote:geez, BJoe, isn't 3.75 hp a bit overkill? lmao....

For a basher....nah, especially if you're going to do your Dennis Anderson impersonation with that rig:racing:
Reply
#16
that's not priced real bad... I may pick one up to try in the hellfire and also check it out in the savage, that engine has a bunch of time on it and probably needs replaced also...

gotta have the power if I wanna drive like Dennis right? Big Grin
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#17
OS 30VG is the way to go lol. That or axial
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#18
Rolleyesgood idea get like a .40...the bigger the number the more power right...sighRolleyes
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#19
mike you are just a dumb racer. i want to get the 7.7 from the genesis
Hi im johnny knoxville and welcome to jackass
Reply
#20
Czech-it-Out Graphics Wrote:Rolleyesgood idea get like a .40...the bigger the number the more power right...sighRolleyes

hey, if I can figure out a way to mount that 350 chevy engine that's in the garage onto the chassis, I'll do it!
"if guns cause crime, all of mine are defective" - Ted Nugent
Reply
#21
Just sayin the OS cause of the 2 year warranty Lol
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#22
V-spec.... Basher approved by muah. $225 new or get one from a certain hippy for $75 and send it in with a BS story and get a new one. Then send that one in when it wears out! (12 gallons strong)
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#23
hmm who could possibly have recommended that, oh yea...
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#24
New VSpec $225 from where? I always thought those were $300 roughly.
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
#25
Whoops. Thought they were a bit cheaper I guess.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)