Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Official Mugen MBX5T Thread
Czech-it-Out Graphics Wrote:those drips are decals arent they Wink

And for 5.95 you too can have drips that nice Wink

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
lol i tried those once, like some chicks look good from far but far from good lol its a good way to get away from the one color bodies tho, just a PITA to put on IMO
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Czech-it-Out Graphics Wrote:lol i tried those once, like some chicks look good from far but far from good lol its a good way to get away from the one color bodies tho, just a PITA to put on IMO

They look nice, it depends what kind of body it is for how hard they are to put on

Nice looking truck, wish I had one lol
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
you'll F that body all up the way u drive.......hehehehe

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Well....he will have to just get a Majestic body next.
Mine is holding up really good and not bustin thru yet
and they are thicker bodies.
IMO worth getting one since they have it for the Mugen
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen


NTC3 RTR assoc .15
NTC3 OS .18

Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
Reply
jconcepts will have the x5t bodies in a bout a month, .040 or .060 a little more stylish than those majestics Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
The Mugen looks hot Kevin! good luck tomorrow Smile
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
The Mugens did well today , Tq and win (me) Kevin had the lead for a while too while traffic beat me up , a marshall decided stumble upon my truck on the 1st lap . I drove smart and took it home . All i can say the truck works !!!
Reply
both of your mugens looked really good today.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Ya that was a fun main. Great driving Eddie. I couldnt believe it when I had the lead at the start. I kept telling my self to keep cool, but I didnt and had 3 people drive around me by the time we finished. Truck seems very able, has tons of steering, and built like a tank.

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
I got first 5/last 5 mins of truggy amain on vid today. I'll work on it later.

Great job guys.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
get it up on here poch!!!!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
Who had that big lens camera. Id like to see some of his shots.

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
MX_KEVIN Wrote:Who had that big lens camera. Id like to see some of his shots.

Oh yeah, aparently that was someone from The Herald News...There was some lady interviewing bernie after the mains.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
The guy with that camera works for the local newspaper. He was taking pics because the newspaper is doing a story on the track. I think they said it was the joliet herald?
Reply
THey were also interviewing Sonny o , you know everyone loves Sonny O !!!!
Reply
Heres a building tip for you Rocco. When assembling the axles threw the bearings and instilling those wheel extenders. Dont forget to check that set screw whith the wheels on for leverage or youll get passed by your own wheels. Eddie F said he notched his pin for the set screw.

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
Ok,couple of questions.
First- The MBX5 truggy upgrade(kyosho has this too right?) next to the production truggy. Does it matter which one I go with performance wise?(which is better basicly)
Second-I know I have seen Kyosho RTR's. No mugen RTR's yet. But are they worth it. Or should I just get the kit?(stupid question,but asking anyway).

Looking for thoughts for future trucks after my time with the ST-1 is done. Which could be soon if the price is right Smile
Myspace.com/Mtdrew24
Reply
Mugen does not offer an RTR , of anything Smile straight up competion kits .

The conversion and the MBX5t are pretty differnt , the converion is basically a longer chassis with hub extenders and a larger spur gear for the larger tires , the MBX5t has long suspension arms , longer chassis , truggy specific shock towers , new improved shocks , the gear boxes are regeard instead of a larger spur , the list goes on , the standerd kit can be bought for less then $450 , thats the truck I have , the prospec has all the bling which looks nice but is not required .
Reply
Vid's up in Multimedia section.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
dude that ttr is fine no reason to go dumpin a bunch of cash on a new truck
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
I saw you made the last post and I knew what you had to say mike! LOL.
Myspace.com/Mtdrew24
Reply
Between the two

I would go Mugen..I am
The Kyosho you would still need to put in some $$ to get it better
The Mugen I would go with the Prospec kit.
Mugen took the time with all the truggies out there before they released the prospec. Mugen parts cost less over Kyosho parts.
The Mugen prospec---you don't need to do anything.
There are some guys that will tell you what you need to the Kyosho to bring it up a bit better.
I know of no RTR for either of these two.

Now to throw a wrench into this
The Losi 8 Truggy is due to come out later this year.
Alot of ppl are looking at that one based of the prototype.
Thing is is the $$$---what are they going to sell them for.
I base this of what my mentor LANCE has said to me---he too would take Mugen over Kyosho. He Prefers the Losi 8 truggy but if the price is right.
You can get a new Mugen MBX5T prospec for about $565 shipped the cheapest I have found and for this month only.

If you do go with Kyosho over the Mugen---look for it used to make it worth it and with the upgrades---look on ebay.
I saw one sell for $450 shipped with parts and an unpainted shell.
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen


NTC3 RTR assoc .15
NTC3 OS .18

Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
Reply
You dont really "need" anything on the ST-R Rolleyes .....
Ive been racing mine since April and havent upgraded a single thing, its all stock and Ive done pretty good with it.
I havent broken a single thing either with about 3 gallons of racing on it.

The Mugens do look nice though....I'd say they are about equal and people should just get what they want and learn to drive the truck Smile
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos

Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos

Kyosho Inferno GT
SH .28
Reply
+1 eric. whatever anyone gets should only be personal preference. any truck will have its flaws or needs, just pick the one that looks like it does what you want and get it. just get used to one and stick with it.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  The Official Mugen Thread allan42r 436 59,194 05-04-2008, 10:26 PM
Last Post: J-Dub
  Official Kyosho sp2/WC/St-RR thread pwnzor 299 44,076 02-16-2008, 09:38 PM
Last Post: Toughtrax
  New buggy, losi 8ight T or mugen mbx5T snoracer 10 3,256 01-15-2008, 08:50 PM
Last Post: motoxer4life
  Mugen Mbx4 Xr Works PMHOURS 9 2,942 01-11-2008, 04:20 AM
Last Post: PMHOURS
  Mugen Screws slaytanic 13 2,798 12-05-2007, 11:02 PM
Last Post: slaytanic
  Need some help Mugen Guys!! Prospec? slaytanic 8 2,233 11-27-2007, 05:40 PM
Last Post: slaytanic
  Official RC8 thread motoxer4life 158 23,376 10-16-2007, 12:01 PM
Last Post: allan42r
  MUGEN help and set up. allan42r 41 6,546 08-20-2007, 07:32 AM
Last Post: chickenfarmer3
  Mugen Linkage???????? BAMF90 27 4,650 08-15-2007, 03:47 PM
Last Post: chickenfarmer3
  Mbx5t pics motoxer4life 39 5,882 08-06-2007, 05:40 PM
Last Post: motoxer4life

Forum Jump:


Users browsing this thread: 6 Guest(s)