01-29-2008, 08:31 PM
Go for it!!! Slot car track can go along with the thomas the tank engine part and that (model train?) thing by the window lol....Total store domination!!!
Tekno EB48.4 HobbyWing XR8 Sanwa M12
The Official Crawler Thread
|
01-29-2008, 08:31 PM
Go for it!!! Slot car track can go along with the thomas the tank engine part and that (model train?) thing by the window lol....Total store domination!!!
Tekno EB48.4 HobbyWing XR8 Sanwa M12
01-30-2008, 02:37 PM
TOTAL STORE DOMINATION! I want to build the course over the entire front of the store.mash:
[SIZE="5"][COLOR="Red"]Wheel
Wreck Wrench Repeat [/COLOR][/SIZE] Just call me Zack
01-30-2008, 05:47 PM
Jeepguy Wrote:TOTAL STORE DOMINATION! I want to build the course over the entire front of the store.mash: I already cad'd that up 2 weeks or so ago. 2 sections 4' wide x 20' long with a walking path down the middle with the ability to connect the 2 with bridges.
02-03-2008, 02:07 AM
I'm in!! I sealed the deal on a brand new assembled Axial today it has a 75t integy motor and a tazer esc. 645 on steering too. 3000 mah pack even. 3000 mah and a 75t motor sheesh this thing will crawl for 34 days straight lol Plus the guy is airbrushing me 2 new bodys for it. I'll post pics when it gets here.
WOO HOO!
LOVE AMERICA OR GET THE HELL OUT!
www.Suburbanchicagorockcrawlers.com www.Keyknivesonline.com www.rcslot.com rc crawling headquarters and great customer support!
02-03-2008, 04:40 AM
I 've been real life rock crawling in the past several times with friends at the badlands in ind. and lbl kentucky and I have to admit this axial crawler is incredibly life like the way it manuevers over large objects and climbs steep grades while doing so. Very cool.
When is L.H. going to get a friggin indoor or outdoor course for the new crawler craze? i heard there was talk about it.
02-03-2008, 10:35 PM
Tex this is what ya need to get into rc wise! Laid back, easy going and ton of fun! Get one Tex! lol
GIT-R-DONE racin team
bubbaracing(hillbilly deluxe)stratcat(long haired hillbilly)Addicted to Nitro(Redneck#2) Hoobajoob(Greek hillbilly!)Racin' Ranger1(Lil' hillbilly)
02-03-2008, 11:09 PM
Lol, make the smokers pits a BIG Crawling course
I think thats a good idea, since the Carpet track is now pits. Run it by Bernie next time you're there or Scott or Dennis or something.
LSP lots of Khz, Werks .28 8 port.
Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
02-03-2008, 11:13 PM
Uhh no, the smoker's pit room will eventually be food/gameroom.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
02-03-2008, 11:38 PM
I talked to Bernie a week ago about building an outside course and he's all for it, has a bunch of rock and will help with the runoff water from the 2 outside tracks! I said something about an indoor course and he asked how much room we'd need? Ponch you need to ask him about an indoor deal? He likes you better! lol mash:
GIT-R-DONE racin team
bubbaracing(hillbilly deluxe)stratcat(long haired hillbilly)Addicted to Nitro(Redneck#2) Hoobajoob(Greek hillbilly!)Racin' Ranger1(Lil' hillbilly)
02-04-2008, 12:50 AM
...theres food in the shop, that'd be a great place for an indoor crawler course. like, the back wall. I know its gonna be for concessions but that'd be a be the best place for a year round crawler course.
LSP lots of Khz, Werks .28 8 port.
Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
02-05-2008, 10:50 PM
Near finished with my tuber build. Started at 6 pm lol.
Welp here it is. 5/32" brake line brazed with propane torch Meets ALL minimum req's for length, width, and height. Just need to finish up the back end and it's done! Tekno EB48.4 HobbyWing XR8 Sanwa M12
02-06-2008, 03:31 AM
Lookin good dude!
GIT-R-DONE racin team
bubbaracing(hillbilly deluxe)stratcat(long haired hillbilly)Addicted to Nitro(Redneck#2) Hoobajoob(Greek hillbilly!)Racin' Ranger1(Lil' hillbilly)
02-06-2008, 07:45 AM
That looks like a bad azz setup.
02-08-2008, 12:41 AM
Monster Scheme looks good. Gotta hand it to you man. I'm impressed, and I dont even like crawlers at all.
LSP lots of Khz, Werks .28 8 port.
Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
02-08-2008, 12:47 AM
Thanks. I'll get some better pics tomorrow, I have more body panels installed with the electronics.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
02-08-2008, 03:23 AM
Nice Poncho!
GIT-R-DONE racin team
bubbaracing(hillbilly deluxe)stratcat(long haired hillbilly)Addicted to Nitro(Redneck#2) Hoobajoob(Greek hillbilly!)Racin' Ranger1(Lil' hillbilly)
02-08-2008, 07:41 AM
I dont like monster but nice!
02-08-2008, 08:18 AM
Thanks guys...
I still have to find out what I'm doing with this dig now, it's hitting the chassis and not allowing full flex. Tekno EB48.4 HobbyWing XR8 Sanwa M12
02-08-2008, 07:14 PM
After the initial meeting of SCRC, I learned that my AX10 was lacking some basic functions like a DIG, tighter steering, and better ground clearance.....as well as lowering the CG.
So this week I aimed to address those items, and I just finished the work. Here are the pics.
Jeep_Guy (a.k.a Xirtic)
*CEN Matrix Buggy (Brushless) *Duratrax Warhead EVO (Brushless) *Axial AX10 Crawler (Brushless) *RC18T (Brushless)
02-08-2008, 07:28 PM
How did you improve the steering other than the dig?
Tekno EB48.4 HobbyWing XR8 Sanwa M12
02-08-2008, 09:22 PM
To IMPROVE STEERING I did:
1. Took the larger steering rod off, and replaced the ends with angled ends to push the rod about 1/8" further from the axle. 2. Slightly counter sunk the c-hub screws on hte front side. I think that i got most improvement from the moving of the larger steering rod. I can now chase the dogs around with far fewer 3-point turns in the family room.
Jeep_Guy (a.k.a Xirtic)
*CEN Matrix Buggy (Brushless) *Duratrax Warhead EVO (Brushless) *Axial AX10 Crawler (Brushless) *RC18T (Brushless) |
« Next Oldest | Next Newest »
|