03-05-2006, 04:52 PM
Nice... an oldschool homegrown!! Sounds like a nice parts spec too. I have a chris king headset on my Kona right now. Those things will never die...
|
Bikes and Bike parts (CANCEL)
|
03-05-2006, 04:55 PM
Yes thats when I was young skinny and in shape. Not married and had shit loads of cash to spend. Its all xtr componets and the brakes are Johnny Tomac (Ithink) the thing is in mint condition. Ran it half a season before I blew my knee out a second time.
We used to ride at swallow cliff area in PAlos, there are about 60 miles of trails there and alot of single track... At least there used to be.
A friend will help you move, but a REAL friend will help you move a body.
03-05-2006, 05:01 PM
it's still there. It has actually grown. I have done some work with CAMBr and have helped build more trails and maintain the old ones. The XTR line is great but has a price tag to go with it. I have gone with SRAM stuff lately... They are giving shimano a run for their money...
03-05-2006, 05:01 PM
(This post was last modified: 03-05-2006, 05:45 PM by FreeRideFrosty.)
I made a boo-boo...
03-06-2006, 11:33 PM
Bump for tons of parts. For the right price I can probably set up a really nice Mountain Bike or Road bike as well...
03-16-2006, 11:40 PM
This is just about everything that I have... It is long but I just copied and pasted it from another forum I have it listed on.... offer up
I have a good amount of parts that I am willing to sell as well as complete bikes... If you don't see something listed here feel free to PM me to see if I have one or can get one. I work at a bike shop and all bikes have been well taken care of. I can probably get pics on request. Bike #1 Custom Holland Time Trial Bike The Frame is hand brazed steel and was made in southern California. It is a little bit older but retailed for roughly $6000 when new including the additional wheelset. It has full Dura Ace componentry (older 7-speed) that is still flawless. It was maintained religiously before being stored for a while. It has aero bars, carbon fiber seat post, frame mounted pump, but no pedals. (I will be keeping them) As stated EVERYTHING is Dura Ace and in flawless condition. 1 wheelset is strictly for racing. It is set up with a HED Full carbon fiber rear wheel (700c) and a custom laced front wheel to a custom hub out of Japan. (650c) They will both roll forever. This set has sew-ups on them. There is no brake track on the front wheel. The other wheelset is for general cruising or racing. All of the spokes are bladed and the wheels are hand built. The second set runs regular tubes. (700 c rear and 650c front) Any Questions please ask. I am not sure what to ask since the bike is a 1 off setup. I am looking to move on to a fixed gear and as much as I truly love this bike... will need the money to go towards the next bike. The thing is VERY light and nimble as a cat. Bike #2 Dirtjumper/ light free ride/ XC Hardtail It is a K2 flying Monkey frame with a Manitou fork. (I want to say switch or stance... the cheaper one. It is in the garage and for some reason I cannot remember what fork is on it.) It is set up mostly LX and XT including hubs and derrailleurs. The brakes are deore v-brakes and the wheels are rhyon lites. It is a real solid build and a great start into a rock solid hardtail. I bought it for use as a college bike but will be building up a new bike and taking my Kona instead. Make an offer or PM me and we can talk about pricing. Questions?? Please ask... My Kona and Rocky Mountain frames I will most likely be keeping. I do have assorted other parts that would be up for sale and can rotate forks depending on what people want. Forks: All in GREAT shape Marzocchi Dirt Jumper 2 (1 small scratch on the black leg) Rock Shox Psylo U-Turn Race - The top of the line psylo. It has adjustable travel and compression externally and is my favorite all around fork. Nice and plush but ver progressive. Manitou - I can't remember the name but it is air damped and a great fork for dirt jumpers or freeriders on a budget. Components: This is what I am pretty sure I still have... X.9 rear derrailleur X.0 Twist Grip shifters (VERY Nice) Kona DH stem Kona DH Bar Tru Vative Bar (generic DH/FR bar) Mavic Wheelset with XT disk hubs Ditch witch wheelset with deore level hubs Assorted seat posts, seats, brake and derrailleru parts, possibly an easton stem, thomson stem, Monkey light Bar or other parts. Any questions?? Feel free to ask or PM Me... I am open to offers on all parts!! The main reason for selling is to thin out the herd a buit and add some new rides to the stable. I have a few BMX bikes as well (Robinson SST, Dyno Sonic, GT Bestwick Pro) that I could probably part out or sell whole. I can be PMed on here, AIMed as LombardoMTBr, or reached at [email protected] . Thanks for taking the time to look. and pics on request. Dan S |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 5 Guest(s)