Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Official yack away thread
[Image: damn.jpg]
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
Dumb Ass French!!!!
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
Men Vs. Women; Driving
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
Chuck and larry is pretty funny. Id say its worth seeing
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
[Image: 26246ae356bb9856.jpg]

Here is a spy shot i snapped here at work. This is the actuator that will be going on SOFIA which is a plane designed for high altitude flights with a telescope, this thing slides a monster telescope and positions it. 15,000 in/lbs per tooth
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
How about a scale reference...like a ruler or something in there...it must be massive, yes?
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
ya its pretty huge, that hammer sitting to the left is about 7-8 inches long if that helps
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Mike where do you work???
Reply
Rotary Actuators, Linear Actuator, Electronics, Motors, Sensors, Environmental Testing, Flight Controls, Built to Print
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
MPC products
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Here are some more pics

[Image: polishingbeginsnolubesp8.jpg]

[Image: 2r6219007cq4.jpg]

[Image: 2r622004jx7.jpg]

[Image: 2r622007dd7.jpg]

[Image: 2r622010ih3.jpg]

[Image: 2r622010ih3.jpg]

[Image: 2r622022gr6.jpg]

[Image: 2r622028cy5.jpg]

[Image: polishingbeginsnolubevk0.jpg]

[Image: sofia004nj3.jpg]

[Image: sofia010ub7.jpg]

[Image: testsetuppo2.jpg]
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
there gonna think your like an f'in spy or or something w/all the pics lol.
Reply
i didnt even take those last ones, they were on the network already Smile prolly wouldnt be good if they found out i posted them tho LOL
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
nice job right there, what do you do?
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
Is the case magnesium? Looks like big bucks...

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
it has a zinc coating on it actually. that whole unit costs around 200K and i think the plane needs 4 of em. I pretty much just watch, help run tests etc
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
I must rant.....

So I go to Philadelphia on business and coming home yesterday the flight gets delayed because of weather...while we are locked in the plane on the Philly taxiways, along with about 30 other flights, I listen to the ground traffic control on the headsets...well, these knuckleheads had planes stacked everywhere, and so gridlocked....that when flight routes opened up they couldn't get to the runway...and then, because Philly is under construction, they had only one runway open, because they were PAINTING LINES on the other at 11:30 AM...how about doing that at night, when the are no flights??? so anyway, we got locked in the jet for 3.5 hours inching toward the runway, missing opportunites to depart when the weather allowed it, then when we are #1 for departure, United cancels the flight and calls us back to the gate...kicks us off the plane and tells us they are fully booked out of Philly until Saturday!! STRANDED!!! So, I rent a car and start driving.. Philly at 4:00pm is like Chicago at 4:00pm...gridlock crawl...so I finally manage to crawl out to the PA Turnpike, and get rolling....30 minutes into it, it starts to rain, then pour, then tornado...and if you have evr been on the PA Turnpike, it's a hairy drive on dry pavement...so I stress along for few hours and now it's dark, and rainy, and heavy traffic....repeat for around 8 hours and I'm in eastern Ohio and pulling off the get a hotel. Finished the last 400 miles to day for a total of 800 miles and 15 hours behind the wheel.

You gotta love business travel!

At least I made it home without wrecking the rental.
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
But it could be worse...I could have found my car in the airport lot like this guy did....

































[Image: DSCN3882.jpg]
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
man that really sucks
Reply
... And thats why my car will NEVER be parked in Chicago EVER again!!! Mawwwhahahaha!! Come get me daily!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
Daley
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Eat me
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
DAVEC-NITRO-RS4 Wrote:I must rant.....

So I go to Philadelphia on business and coming home yesterday the flight gets delayed because of weather...while we are locked in the plane on the Philly taxiways, along with about 30 other flights, I listen to the ground traffic control on the headsets...well, these knuckleheads had planes stacked everywhere, and so gridlocked....that when flight routes opened up they couldn't get to the runway...and then, because Philly is under construction, they had only one runway open, because they were PAINTING LINES on the other at 11:30 AM...how about doing that at night, when the are no flights??? so anyway, we got locked in the jet for 3.5 hours inching toward the runway, missing opportunites to depart when the weather allowed it, then when we are #1 for departure, United cancels the flight and calls us back to the gate...kicks us off the plane and tells us they are fully booked out of Philly until Saturday!! STRANDED!!! So, I rent a car and start driving.. Philly at 4:00pm is like Chicago at 4:00pm...gridlock crawl...so I finally manage to crawl out to the PA Turnpike, and get rolling....30 minutes into it, it starts to rain, then pour, then tornado...and if you have evr been on the PA Turnpike, it's a hairy drive on dry pavement...so I stress along for few hours and now it's dark, and rainy, and heavy traffic....repeat for around 8 hours and I'm in eastern Ohio and pulling off the get a hotel. Finished the last 400 miles to day for a total of 800 miles and 15 hours behind the wheel.

You gotta love business travel!

At least I made it home without wrecking the rental.
Did that for 8 months! Never again!!!!!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
ahh the days of business travel. everything that can go wrong will go wrong.
Confusedalute:Casterracingusa.com Confusedalute: TrueRC.comConfusedalute: Confusedalute:Fusionracingrc.com (Fusion Fluids) Confusedalute: Nitrotoyz.comConfusedalute:Thercshack.comConfusedalute:Fastlane-graphix.comConfusedalute:
Reply
I don't think I could have done it Dave. I'm a road rager, I always run into a situtation where I want to cram my car up someones ass! Rolleyes
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  RCX Expo Long Beach Official Information April 28-29th, 2012 LOST IN MN 4 5,596 05-02-2012, 01:59 PM
Last Post: LOST IN MN
  animal thread.. Gene 16 4,080 11-26-2009, 11:50 AM
Last Post: Gene
  "Official" 1:1 truck/car thread!!! squirrel 21 6,967 05-28-2009, 03:39 AM
Last Post: FreeRideFrosty
  Official Car Audio Thread FreeRideFrosty 439 54,627 07-15-2008, 09:24 PM
Last Post: Ponch
  Updated Car Thread FreeRideFrosty 39 7,723 06-22-2008, 11:16 PM
Last Post: FreeRideFrosty
  The i hate the shift i work thread cheesecake 15 3,828 01-18-2008, 06:53 AM
Last Post: AddictedtoNITRO
  The Official "I feel like showing off my stuff" thread. DAVEC-NITRO-RS4 296 47,398 12-22-2007, 03:34 PM
Last Post: DAVEC-NITRO-RS4
  Official B.S. / Chat / Insult Thread GWPHOENIX 174 27,874 11-04-2007, 03:50 PM
Last Post: allan42r
  thread subscription emails.... Mr. Tune 0 1,069 03-29-2007, 09:20 PM
Last Post: Mr. Tune
  Looking for Thread BJoe 18 3,404 03-22-2007, 11:02 AM
Last Post: BJoe

Forum Jump:


Users browsing this thread: 2 Guest(s)