Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
question
#10
3600 is a big pack.

Batteries 101:

mah stands for milliamp hour. 1000mA = 1A, so for example, 3600mah = 3.6ah. This means that if you put a 3.6 amp draw on the battery, it would take 1 hour to fully discharge.

Thinking in reverse, if you charged it at 3.6amps and it was dead, it would take 1 hour to charge. The lower you charge at, the longer it will take. Charging at a lower setting will help against peak detection problems, which help to get a better charge on the battery.

I charge my 3300packs in my starter box at 2amps and have never had a problem. When they are real low, it takes forever to charge, but that's ok. I start the charge before I go to bed and when it's done it'll simply trickle charge. In the morning, I swap to the other battery, start it up and head off to work. When I come back, they are ready to go Smile.

Charging at high amps, like 4 should only be done in an emergency. Say you forgot to charge your batteries and you need some charge just to get you buy, then go for it. Otherwise stick to the lower settings for longer battery life.
Reply


Messages In This Thread
question - by AddictedtoNITRO - 10-02-2006, 06:35 PM
question - by firesprink281 - 10-02-2006, 06:38 PM
question - by Mr. Tune - 10-02-2006, 06:40 PM
question - by AddictedtoNITRO - 10-02-2006, 06:58 PM
question - by Ponch - 10-02-2006, 07:23 PM
question - by Mr. Tune - 10-02-2006, 07:23 PM
question - by Mr. Tune - 10-02-2006, 07:24 PM
question - by AddictedtoNITRO - 10-02-2006, 07:29 PM
question - by Ponch - 10-02-2006, 07:39 PM
question - by Mr. Tune - 10-02-2006, 07:49 PM
question - by Ponch - 10-02-2006, 07:58 PM
question - by snakebite46 - 10-02-2006, 07:58 PM
question - by Czech-it-Out Graphics - 10-02-2006, 08:00 PM
question - by Ponch - 10-02-2006, 08:01 PM
question - by snakebite46 - 10-02-2006, 08:02 PM
question - by Ponch - 10-02-2006, 08:13 PM
question - by Czech-it-Out Graphics - 10-02-2006, 08:17 PM
question - by AddictedtoNITRO - 10-02-2006, 08:18 PM
question - by ghosty - 10-02-2006, 08:29 PM
question - by AddictedtoNITRO - 10-02-2006, 08:37 PM
question - by ghosty - 10-02-2006, 10:40 PM
question - by AddictedtoNITRO - 10-03-2006, 07:24 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Losi 2.4ghz Tx/Spektrum Rx compatability question. BJoe 1 4,459 03-06-2009, 10:55 PM
Last Post: BJoe
  NiMH charger question mikev 5 4,472 02-05-2009, 09:59 PM
Last Post: mikev
  super rooster lipo question AddictedtoNITRO 28 11,714 12-21-2008, 06:07 PM
Last Post: AddictedtoNITRO
  Have a Lipo opperation in Question!? team3six 0 2,860 12-20-2008, 09:09 PM
Last Post: team3six
  SPEKTRUM Servo Question team3six 3 3,654 02-27-2008, 10:04 PM
Last Post: team3six
  Blown Servo/ ESC Question goat585 1 1,969 03-27-2007, 09:35 PM
Last Post: AddictedtoNITRO
  mini question AddictedtoNITRO 16 3,847 10-26-2006, 07:28 PM
Last Post: rusty savage
  m8 question avmech 4 2,047 08-16-2006, 01:50 AM
Last Post: avmech
  Rechargable AA Batteries Question PoPRC 19 3,747 04-23-2006, 05:23 PM
Last Post: DAVEC-NITRO-RS4

Forum Jump:


Users browsing this thread: 1 Guest(s)