+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Bashers Forum (https://www.chitownrc.com/forum-11.html)
+--- Thread: The Official Crawler Thread (/thread-8181.html)
The Official Crawler Thread - MX_KEVIN - 03-11-2008
rocco79 Wrote:MX kevin-
You too? LoL!
Nitro racing is very time consuming and Ive beed too busy to get out as much as Id like, so this lets me drive around the house without going threw the walls. Plus it seems the little one has an intrest cause its more her speed and I really enjoy watching her drive it.
The Official Crawler Thread - Ponch - 03-11-2008
Thinking out loud here...
I could get my ax10 to super class if I....
Got this stuff
Oversize Narrow Rockster Bead Locks (Black Chrome)
12mm to 17mm Wheel Adaptor widener for Clod Crawler TXT - eBay (item 120213888163 end time Mar-22-08 03:26:38 PDT)
Longer Links
Longer Driveshafts
Smaller Pinion/larger spur
Moab xl's
Body
Correct?
The Official Crawler Thread - bubbaracing - 03-12-2008
Now why would ya do that!
The Official Crawler Thread - Jetboat - 03-12-2008
Ponch...
WHY would you do that??!?!?!
If you want to go super class, get some clod axles and be competetive.
The Official Crawler Thread - AddictedtoNITRO - 03-12-2008
If I missed it I'm sorry but what shock oil should I be runnin in this jefferson crawler with maxx shocks? I want to redo them today but kinda missing that info lol
Thanks
Guys. Other than that I got some driveshaft bindage? Or some sort of other binding Just enough to limit 1 side of the crawler so It might be an easy fix. idk
Thanks
The Official Crawler Thread - Jetboat - 03-12-2008
Jefferson crawler????
Shock Oil???? I have actually ran them with just enough oil to keep everything lubed. I personally like a light weight oil. I think I have been using something like 50wt in mine.
The Official Crawler Thread - AddictedtoNITRO - 03-12-2008
It's a jefferson chassied tlt based crawler.lol Sorry if I confused you. I was thinking lighter is better in here due to the wanted articulation. I have some 30,40,50,70,wt I'll throw 30 in there for now. Also do ya'll think a 45t motor is too low? I seen a sweet lookin 60t on rc4wd that might give me the more torgue.
RC4WD - The Ultimate Site for RC Off-Road Enthusiast!
One more q for ya. Do ya'll run a batt pack for the servo or just run them like normal. I have a hitec hs645 on steering and am running a ib4200 pack. Thanks
The Official Crawler Thread - Jetboat - 03-12-2008
still dont know what a Jefferson chassis is....
I have ran receiver packs but, now I run a CC BEC, sure beats overloading your ESC in the middle of a comp (Been there, done that). Personally, I would ditch that big stick pack, either go with a rc18 pack, lipo or a custom 2/3 pack. Crawling doesnt take allot of power. As for motors, I used to run 55t in all my trucks, I have since switched to brushless in the 950kv range. Depending on your transmission/gearing the 45t may end up being too fast. My theory has always been to throw the largest turn motor at it and speed it up with gearing... Kind of like putting a Diesel in a Jeep and using a 4:1 low range. If you want a 55t I have some barely used ones (1 I think never was used) sitting on the shelf, I could trade you for that 45t I need a faster motor for a trail truck.
The Official Crawler Thread - AddictedtoNITRO - 03-12-2008
Welcome to UTRCRC - Utah Radio Control Rock Crawlers
here's a link.I'll let you know on the motor. I gotta see how this performs lol. The stick is not a stick anymore. It's becoming a saddle pack. The esc Is a workhorse. The tekin rebel 2 should handle anything I can throw at it. It has a higher amp rating than any one else. You can even run 2 motors on it if you want and 2 packs. I was just curious if I needed more juice lol. The 4200 packs a mean punch and with the 4200 mah I guess I should have no problems with it running down. I ran about 45 mins on it yestarday and charged it this morning and it only took 1200 mah to peak it back out lol. I don't even know the spur size and pinion size yet but guess I'll buy the largest spur traxxas makes for the pede, just to make sure.
I'm gonna go pick up some new wheels for this thing and narrow them out. Any suggestions on plastic wheels. It had wk on it but kinda blah and needed new paint etc. I can't afford beedlocks yet so I'm gonna do these up for now.
The Official Crawler Thread - Jetboat - 03-12-2008
wheels, go with the HPI MT Star (rears) they are cheap ($8 at HT) and good backspacing. If you are running stock tlt axles you may want to keep them stock width atleast until you get some wideners.
As for the ESC, I run the Mamba Maxx ESC and overloaded my BEC at the second indoor comp. Part of the problem was I had a mini Servo on the DIG (I still say your getting lucky Ponch). You would be suprised just how much juice a servo will pull when you are bound on a rock.
and as far as that Chassis goes....I need to raise the price on the Talon!!!!
The Official Crawler Thread - AddictedtoNITRO - 03-12-2008
Jetboat Wrote:wheels, go with the HPI MT Star (rears) they are cheap ($8 at HT) and good backspacing. If you are running stock tlt axles you may want to keep them stock width atleast until you get some wideners.
As for the ESC, I run the Mamba Maxx ESC and overloaded my BEC at the second indoor comp. Part of the problem was I had a mini Servo on the DIG (I still say your getting lucky Ponch). You would be suprised just how much juice a servo will pull when you are bound on a rock.
and as far as that Chassis goes....I need to raise the price on the Talon!!!!
lol I guess thats why the chassis is discontinued. I was seriously thinking of getting one of those talon chassis after I get this thing all done to my likeing. Unfortunatly I just got back from leisure hours and bought the rpm crawler rims. oops :eek:. Oh well these will work for now I guess till I get the beadlocks.
The Official Crawler Thread - AddictedtoNITRO - 03-12-2008
what is regulation width?
The Official Crawler Thread - Jetboat - 03-13-2008
you can go all the way to either 12" or 12.5" wide (dont have the rules in front of me)
The Official Crawler Thread - AddictedtoNITRO - 03-13-2008
ok wow. I'm at like 10 and a half lol
The Official Crawler Thread - Ponch - 03-19-2008
Not cool...
I put traxxas shafts all around, then I bound it up, and something in my diff went out. wtf lol.
The Official Crawler Thread - AddictedtoNITRO - 03-19-2008
never ends. My rear diff came unlocked last night lol
The Official Crawler Thread - Jetboat - 03-19-2008
whats the deal....is everyones comp rig breaking?
Im going down to the "farm" this weekend to add some stuff to the course for the May/June comp, anything special anyone wants to see?
The Official Crawler Thread - BJoe - 03-19-2008
Glad I don't have a comp rig if they'er all breaking suddenly
The Official Crawler Thread - Jeep_Guy - 03-19-2008
Matt....check the input shaft....where the E CLIP is. That is where mine blew out. ALSO, my lockers were really starting to deform.
The Official Crawler Thread - Ponch - 03-19-2008
Will do
The Official Crawler Thread - AddictedtoNITRO - 03-19-2008
The guy I got my rig from locked my diffs with silly putty. I had the front go 2 weeks ago so I relocked it with jb. Gonna relock the rear jb tonight. I locked my trans the other night with ca
The Official Crawler Thread - Racin' Ranger1 - 03-19-2008
my "semi-scaler" Chassis is a Bmv-ii, TLT axles, and moab tires
Body is a newbright F-350 hard body. its got a crappy paint job but i figure its just gonna get scratched by rocks.
![[Image: 100_2327.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2327.jpg)
![[Image: 100_2328.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2328.jpg)
![[Image: 100_2330.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2330.jpg)
![[Image: 100_2331.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2331.jpg)
![[Image: 100_2332.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2332.jpg)
![[Image: 100_2333.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2333.jpg)
and my Bubba made tuber with added body panels and stickers
![[Image: 100_2334.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2334.jpg)
![[Image: 100_2335.jpg]](http://i26.photobucket.com/albums/c124/rc10gtbasher1/100_2335.jpg)
The Official Crawler Thread - AddictedtoNITRO - 03-19-2008
get that thing done and bring it to naperville!
The Official Crawler Thread - MX_KEVIN - 03-19-2008
I see a dirt bike/crawl day in the near future @ Buffalo Pit. I remember some nice hills for the crawler.
The Official Crawler Thread - Racin' Ranger1 - 03-19-2008
yeah im game! im going to badlands on the 29th i think if its done im gonna bring thisthis along. racin' ranger2 is bringing his jato with paddles so ill try yo catch video of us running