+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Tech Forums (https://www.chitownrc.com/forum-7.html)
+--- Forum: Engine / Drivetrain (https://www.chitownrc.com/forum-17.html)
+--- Thread: dent in pipe!! (/thread-4678.html)
dent in pipe!! - kevinF - 09-28-2006
ok well a week or so ago i got this dent in my pipe and was wonderin if it is gonig to affect performance or ruin the engine?? also today i took it out and got it tuned and was making a high speed run then after about 5 seconds of WOT it started to sound like it was running out of gas so i hit the breaks and then it slowly died, but there was plenty of fuel, just it wouldnt start cause the glow plug died. my question is did that dent cause that to happen?? thanks, kevin
PICTURES:
![[Image: 100_3438.jpg]](http://i46.photobucket.com/albums/f111/traxxas123/100_3438.jpg)
![[Image: 100_3437.jpg]](http://i46.photobucket.com/albums/f111/traxxas123/100_3437.jpg)
dent in pipe!! - Ponch - 09-28-2006
Uhh idk but I'd get that out if I were you...Try some ice yet?
dent in pipe!! - kevinF - 09-28-2006
well i havent figured out what to use to plug up the hole that connects to the manifold...
dent in pipe!! - rocco79 - 09-28-2006
A dent CAN rob your engine of power ... Since a two stroke engine uses exsaust pressure to run properly its likey that dent could have had somthin to do with your recent problems.... Even small dents like that can affect performance
dent in pipe!! - Ponch - 09-28-2006
I used the cap from my clutch shoe remover...
Go to a store and pick up some corks.
dent in pipe!! - Ponch - 09-28-2006
Oh and pick up the latest issue of RCCA, very thorough explanation of how a 2 stroke's pipe works.
dent in pipe!! - rocco79 - 09-28-2006
traxxas thrasher Wrote:well i havent figured out what to use to plug up the hole that connects to the manifold...
They sell caps at the lhs
dent in pipe!! - kevinF - 09-28-2006
thanks rocco, well I need a new glow plug o maybe ill make a trip up there before sunday.
dent in pipe!! - kevinF - 09-28-2006
Ponch Wrote:Oh and pick up the latest issue of RCCA, very thorough explanation of how a 2 stroke's pipe works.
yeah i have that one Im a subscriber and i read it, and now that I think about it yeah it will rob me of power....ahhaah thanks for reminding me what i read
dent in pipe!! - Ponch - 09-28-2006
Yep stumbled across that article in school one day.
dent in pipe!! - rocco79 - 09-28-2006
No problem... They come in a pack of all differnt sizes... They make lil ones that can cover the pressure line too
dent in pipe!! - kevinF - 09-28-2006
ok kool thanks rocco.
dent in pipe!! - Ponch - 09-28-2006
rocco79 Wrote:No problem... They come in a pack of all differnt sizes... They make lil ones that can cover the pressure line too
All you gotta do for the pressure line is zip tie a peice of fuel tubing onto the nipple and zip tie a screw in the other end.
dent in pipe!! - Ponch - 09-28-2006
Wait I remember what I did before- the fuel line on the nipple, a glow ignitor cap on the stinger, and I jammed a sharpie in the part that connects to the manifold.
dent in pipe!! - rocco79 - 09-28-2006
Ponch im glad you feel the need to post in every thread.... But instead of jammin sharpie parts in the pipe a 3 dollar pack of caps will do the job fine time and time again...
Besides the caps are useful for capping your fuel inlet on your motor during breakdowns and fuel tank openings
dent in pipe!! - Ponch - 09-28-2006
I don't feel the "need" to post in every thread. I just post in threads that I know something about.
dent in pipe!! - rocco79 - 09-28-2006
ohhh ok..............................................................
Then you know about everything then i see..
dent in pipe!! - maxximum_44 - 09-28-2006
rocco79 Wrote:Ponch im glad you feel the need to post in every thread....LMAO!!!! Sorry LOL!!!
Would a big dent in the header cause trouble?
dent in pipe!! - rocco79 - 09-28-2006
Max
I think a dent in the header would be even worse... At rd4 i was having issues with my p5x and a simple header change made a world of differnce. Same pipe justa long header and the power that came outta the mill was improved 100%
dent in pipe!! - maxximum_44 - 09-28-2006
Thanks
dent in pipe!! - HAGASAN - 09-28-2006
You should never run an engine WOT for no more than a few seconds. Were you doing high speed runs with it and running it a top speed for those 5 seconds?
dent in pipe!! - kevinF - 09-28-2006
HAGASAN Wrote:You should never run an engine WOT for no more than a few seconds. Were you doing high speed runs with it and running it a top speed for those 5 seconds?
well on the outdoor track at LHR your on the throttle WOT for about 5 seconds.....and i was doing this in the street
dent in pipe!! - Czech-it-Out Graphics - 09-28-2006
sounds like u need to retune, i dont think a dent like that would cause the problems ur having
dent in pipe!! - kevinF - 09-28-2006
well yeah i did need to richen it 1/8 turn cause it was a little leaner than I like, and thats prolly why i blew the glow plug......but i still think I should get the dent out, im freezing it right now, so well see
dent in pipe!! - Czech-it-Out Graphics - 09-28-2006
well i dont think an 1/8th of a turn is enough if ur blowin plugs, check the rod to make sure its still in good shape and maybe use a temp gun next time lol