Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to bind spektrum
#1
how do you do it????
Reply
#2
i think its press RX button hold turn on truck and realease when flashing.....hold button on back of TX turn on TX release when flashing then wait for solid lights on both then its done. if im wrong someone chime in
Reply
#3
Turn on the reciever, or w.e
hold the button till it flashes.

now while holding the button on the transmitter, turn it on, while holding brakes or w.e you want your failsafe points to be. thats the proper way at least.
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#4
well im still having the same problem it binds, works for like 2 seconds then pulses both servos wtf
Reply
#5
thats gay
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#6
ok i tried it with different servos outside the buggy and its fine, so ill change the servos.
Reply
#7
J-Dub Wrote:Turn on the reciever, or w.e
hold the button till it flashes.

now while holding the button on the transmitter, turn it on, while holding brakes or w.e you want your failsafe points to be. thats the proper way at least.

first part is wrong.

you have to have both receiver and transmitter off, then hold the button on the receiver, turn on the receiver and wait untill it flashes constantly, then hold the transmitter button and then turn on radio and wait till that button flashes constntly, then let go off button and wait a few seconds for the lights to be solid green.

its in the manual meatwad
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#8
lol, well thats what I meant, It might have sounded wrong.
LSP lots of Khz, Werks .28 8 port.

Revo 2.5, TRX 3.3 Engine, Center Diff. Fast and Turns on a dime.
Reply
#9
kevinF Wrote:first part is wrong.

you have to have both receiver and transmitter off, then hold the button on the receiver, turn on the receiver and wait untill it flashes constantly, then hold the transmitter button and then turn on radio and wait till that button flashes constntly, then let go off button and wait a few seconds for the lights to be solid green.

its in the manual meatwad

Kevin is correct. And if you want to set the fail safe to a specific position you'll need to hold the controls in that position while turning the Tx on, and keep them there until the light turns solid on the Rx.

I generally bind mine at half brake.

Its enough to slow the buggy down without burning the servo out.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Futaba 3PM and Spektrum SR3000 Krosenqu 3 4,048 07-12-2009, 11:35 PM
Last Post: Krosenqu
  Losi 2.4ghz Tx/Spektrum Rx compatability question. BJoe 1 4,388 03-06-2009, 10:55 PM
Last Post: BJoe
  SPEKTRUM Servo Question team3six 3 3,587 02-27-2008, 10:04 PM
Last Post: team3six
  Spektrum Dx3R GWPHOENIX 0 1,928 01-12-2008, 11:11 AM
Last Post: GWPHOENIX
  KO Propo EX-1 Mars radio. Spektrum?? bubbaracing 7 2,919 10-03-2007, 01:05 AM
Last Post: bubbaracing
  Spektrum Failsafe??? Revoguy22 16 3,920 05-29-2007, 04:48 PM
Last Post: Revoguy22
  Runaway with spektrum? Gforce 26 4,889 04-19-2007, 06:13 PM
Last Post: motoxer4life
  Spektrum DX3.0 .Vs. Jr XS3 Revoguy22 7 2,755 01-07-2007, 05:57 PM
Last Post: Traxxas_Junkee
  Spektrum vs. Nomadio react JTak77 11 3,153 01-01-2007, 10:29 PM
Last Post: SLOW REVO
  Spektrum Receiver Shorting out Packs? Ponch 5 2,154 10-09-2006, 10:03 AM
Last Post: Ponch

Forum Jump:


Users browsing this thread: 1 Guest(s)