Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
opinions needed on .21
#26
cheesecake Wrote:ok so its either the werks b3 the os vg or Novarossi N21BF

so between those wcih one will ive me some gallons trough it.

rb s5........

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
#27
dentguy92 Wrote:I will NEVER own another werks engine, but they do have the best customer service. nova only for me....
why, please tell!!!
Reply
#28
novarossi or RB and be done with it.

Some people are getting decent life out of the Werks and OS motors, will you be some people or the unlucky one?
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#29
Meatwad Wrote:why, please tell!!!

I just never liked the way it ran....I only got about 1.5 gallons out of it.
I am sticking with nova......
TEAM DENTTEK HACKING OUR WAY TO THE TOP!!!!!!

THE ANGRY PEAR IS BACK
Reply
#30
1.5 gallons no shit. thats terrible.
Reply
#31
Tex Wrote:novarossi or RB and be done with it.

Some people are getting decent life out of the Werks and OS motors, will you be some people or the unlucky one?


you cant be unluck with O.S. becasue as long as the engine has been in production in the last 2 years they will get you back running, i have seen O.S. .30's that had no buisness being fixed under warrenty get fixed, as GTA he sent in a worn out as hell beat up O.S. .30 and they are going to fix it for free, or replace it. all you have to do is send it in thru a hobby shop and your good to go, no ?'s asked
member of the smackahoe tribe Confusedlap:

Violator 9.5 Jammin CRT Kyosho Inferno GT HPI MT
Reply
#32
o say o.s .21vg imo its great for the money(150)
The worst dirtbiker is always one step ahead of even the best quad rider....

Tex Wrote:WTF, racing ranger 2?????? and racing ranger 1???? #2 needs his ass kicked for taking someone elses name.
Reply
#33
OS' warranty is great! I've had a great experience with them as well.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#34
Im the unlucky one then. They wouldnt warrenty my first os .18 when there bearing blew at 2 gallons. They said I didnt do the after run on the motor correctly and said screw you basically. I guess it took a few thousand more people to complain about the same problem before they stepped up and took care of people.
[Image: mich1iy1.jpg]
Reply
#35
NOVAROSSI!!!!!!!

Tell them tex... My truggy was flyin with just a p5x!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#36
your P5X is not of this world grasshoppa..............your truggy had flames trailing behind it going down the straight
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#37
he said your truggy is flaming.....
TEAM DENTTEK HACKING OUR WAY TO THE TOP!!!!!!

THE ANGRY PEAR IS BACK
Reply
#38
whats wrong with the .28 JB?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#39
Tex Wrote:your P5X is not of this world grasshoppa..............your truggy had flames trailing behind it going down the straight

LOL! Thanks bro!


Blow me jb...... Cant even text me back but you can bust on me on here.... Sniff SniffWink
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#40
Ill give a big +1 for the .21bf motor. Also in my MBX5T I'm running the same VZB that I got for my Mayhem St a few years back and with a little tuning help from Tex its ballistic also. Good luck with whichever you choose.

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
#41
Mikey, remember its Bonie tuned. Its gonna last just over gallon. He prolly had the head mounted on an angle and the o-rings takin off purposely to make the engine lighter per George's recommendation. Wink

"Rocco, full throttle into the corners!!"
T-T-T Confusedalute:
Reply
#42
RB for sure man......my engine got up to 415* and was ran that way for a whole tank....(due to a huge arileak) and nothing was screwed up. still runs great. i have 6 gallons on it and still can just barely turn it over by hand. O.S. and RB are both great, i own both brands, i hear novas are awesome, i have also heard that werks are good too, but i alosi heard a few complaints about the werks, but i think they straightned those problems out with the PRO.

RB gets my vote the most though
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#43
^^^ ur learning kid...Wink

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
#44
Well not everyone can afford, or really wants to spend like 200 to 400 dollars on an RC motor. When they are just club racing on the weekends...I would probably opt for the 150 dollar engine. instead of a Nova that costs like 300 or w.e
Reply
#45
u dont have to spend 400$ on an engine I dont think anybody here except for chad does. You get what you pay for is what it all boils down to. Spend 200-250 on a RB Nova Werks or even a vspec for that price can be found and you will be happy with the quality.
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#46
well I was just saying I don't see the point in spending 200-250 on something Im not going to use to its full potential, I'd like to have something like that but I can bearly afford gas. ^__^

Plus I don't have that much experience tuning and all of that and my luck I would burn it up or break it in wrong. So I feel more comfortable buying a 150 dollar engine instead of a 250-300. Lol
Reply
#47
j dub, all of the options we have been giving are in the 150-175 range. the rb s5, nova bf, werks b3, and the os vg. are all excellent quality ,non taiwanese and fall in that price range. sure motors can be had cheaper but as far as a quality standpoint that is the best list of 150 dollar mills you are going to find.
Hi im johnny knoxville and welcome to jackass
Reply
#48
J-dub you should have said that part in your first message.
For a first engine that cheep one will do so you can learn to break-in and so you can learn to tune it right (although most people at the track will help you tune your engine), other wise get the more expensive engine.
TEAM CFX RACING
Crop circles are Chuck Norris' way of telling the world that sometimes corn needs to lie down. Confusedalute:
evil3 paint works<-- my site lol(AKA PyroMike, carbonmadness)
Reply
#49
Czech-it-Out Graphics Wrote:u dont have to spend 400$ on an engine I dont think anybody here except for chad does. You get what you pay for is what it all boils down to. Spend 200-250 on a RB Nova Werks or even a vspec for that price can be found and you will be happy with the quality.


........HATER! Wink

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
#50
lmao i knew ud like that Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  opinions on engines for 8ight Tex 87 12,760 02-26-2007, 08:18 AM
Last Post: rocco79
  engine tuning help needed mikecooper 7 2,785 02-28-2006, 10:06 PM
Last Post: Traxxas_Junkee
  engine opinions? JOE 5 2,336 02-14-2006, 03:29 PM
Last Post: Tex

Forum Jump:


Users browsing this thread: 1 Guest(s)