Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dont height, .... 8ight!
#51
UE-Maxx Wrote:I don't know if you go on the grid, Matt, but when you build it, don't use the inlcuded fuel line for the throttle/break linkages. People have been burning up there servos and people are saying that the cause is the fuel line. Use a spring.

I been reading the thread that I posted in the 2nd post, they said basically the same thing-use softer fuel tubing on the brakes and possibly cut the brake spring down.

DAVEC-NITRO-RS4 Wrote:So does Mom know you raided her purse and used her Visa card?

Shh!!! Naa she paid for it...I watched her. But I was with the Visa lol.




You guys are correct, I got it from B-Main. Got that and the foams for $488.75, cheapest I've seen an 8ight with extras anywhere.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#52
that thing looks f'ing sweet man
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#53
Yeah, too bad I have no clue where it is now, I went to the track and it disappeared lol.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#54
i bet you could build a really big jump and sail it with that thing dude. lol

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
#55
Ponch Wrote:Yeah, too bad I have no clue where it is now, I went to the track and it disappeared lol.


Huh?? And that was a really good price. I will be keeping my eye out for one in a few months. Take your time on the build though so you don't ruin $hit....
Reply
#56
buy a tonys screw kit with it, cause I heard that all the stock screws are non metric, and theyll be stronger screws.
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#57
Ponch Wrote:You guys are correct, I got it from B-Main. Got that and the foams for $488.75, cheapest I've seen an 8ight with extras anywhere.

How did you get it that cheap? If I put the 8ight in my cart, it is I think 495. Only 5 dollars cheaper than a-main.


traxxas thrasher Wrote:buy a tonys screw kit with it, cause I heard that all the stock screws are non metric, and theyll be stronger screws.

I asked that question on the grid and they said the tony's screw kit is standard screws too. Don't even have the buggy yet, but I ordered one.
FS-Sportwerks 1/8 Hauler
Reply
#58
yeah how did you get it so cheap?
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#59
traxxas thrasher Wrote:yeah how did you get it so cheap?

He may of had the electronic discount coupon for $25 off his purchase.

Just a thought.
_______________________

Mugen MBX5T C6BB - RB2020
Team Losi 8ight V-Spec - JP1
Kyosho SP2 - P5X - Nova9853
Kyosho ST-R - rolling chassis
Reply
#60
Yep, getting a Tony's kit.

I used the coupon-you needed to get the total price above 500 (hence the foams) to use a 25 off coupon. For those who don't have it, its "8ight" just type it in the coupon box on the right hand side bar.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#61
Even with the 25 off, the 25 wouldn't even cover the taxes?
FS-Sportwerks 1/8 Hauler
Reply
#62
No taxes, they're from VA. (I think they're from VA....)

So $6 shipping, and the box got to me in 3 days (ordered the 7th, got the 10th)

FreeRideFrosty Wrote:Huh?? And that was a really good price. I will be keeping my eye out for one in a few months. Take your time on the build though so you don't ruin $hit....

Yeah, be sure to check around...I bet bmain will still be cheaper even if only by a few $$$... I'm happy I ordered when I did, they have ZERO in stock now....lol
I like kits, and my last kit was built very well...I will go fast in building, but not going to ruin it.

I'm going to pick up a threadlock "stick" because I heard it cures faster, you have to use thread lock on the screws that hold in the shock pistons and have to let it sit for a few hours + or it'll fall apart. So that's what going to take me the longest, I might end up skipping ahead a few steps before I even start and threadlock them together so that when the time comes where I was supposed to build the shocks, I don't have to wait.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#63
Sounds like a deal to me. Looks like I'll be getting it from there instead of A-main.
FS-Sportwerks 1/8 Hauler
Reply
#64
the losis didnt look so hot this weekend showed its "true" colors i guess even drake had trouble driving it
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#65
hahahahahaha
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#66
Still looks like a great buggy. Even the pros have problems sometimes.
Reply
#67
im not saying it isnt, probably 60% of the buggies there were eights and only one made the show, prolly 5 ttrs and 3 made the show Wink the losi has some flaws and u could really see them on this track
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#68
What were people having problems with?? Like I said.... this is why I will run the Hyper 7 for now and then switch to whatever is proven to be running the best come this winter/next spring.
Reply
#69
just going through alotta of the rough sections and sweepers and stuff, I know i heard enough guys bitching about it, it seems as if puting the motor centered like they did is causing handling issues, cuz if you think about it it changes the roll center alot and puts the center of gravity up high in the middle making it suceptable to traction rolling when u catch ruts
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#70
Makes sense. It is possible that they sacrificed a bit on that type of handling for added stability in the air? Maybe if you have enough cash run the 8IGHT on a smooth track and something else on a rutted.... I imagine that there is a setup that will make it work though. It just takes time.
Reply
#71
You guys can believe it or not but, Mitchell Pacin's 8ight went through the whoops on the front straight faster and smoother than any other buggy there, including the expert 8th scale A-main. That's the truth.
Reply
#72
so one is great but the others arent then???
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#73
I know what I saw. That's it.
Reply
#74
Hey guys, what's better;

These or These
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#75
i would think the 7075 grade aluminum ones....but maybe im wrong?
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New buggy, losi 8ight T or mugen mbx5T snoracer 10 3,086 01-15-2008, 08:50 PM
Last Post: motoxer4life
  8ight-B race roller motoxer4life 15 2,675 10-02-2007, 12:28 AM
Last Post: victor v
  Losi 8ight part number son1cn 12 2,838 01-14-2007, 06:24 PM
Last Post: kevinF
  Starter box for an 8ight son1cn 27 4,011 01-03-2007, 01:11 AM
Last Post: Ponch
  8ight Upgrades motoxer4life 4 1,685 12-18-2006, 10:41 PM
Last Post: chickenfarmer3
  8ight stuff motoxer4life 11 2,214 12-07-2006, 07:46 PM
Last Post: rocco79
  Engine for 8ight motoxer4life 21 3,181 12-01-2006, 10:47 PM
Last Post: rocco79
  Losi 8ight T Czech-it-Out Graphics 59 7,391 09-25-2006, 01:45 PM
Last Post: Czech-it-Out Graphics
  Team Losi 8IGHT north_shore_racer 3 2,708 05-23-2006, 10:26 PM
Last Post: maxximum_44
  losi spy shots / 8ight GWPHOENIX 20 4,079 05-07-2006, 10:59 PM
Last Post: squirrel

Forum Jump:


Users browsing this thread: 1 Guest(s)