TTR ST-1 Truggy build up!

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
#1
Well here are some pics of my 16 hour build up of the TTR truggy. I am still waiting on some option parts etc.

First up some pics of the chassis and "z" brace, as well as a small plate that bolts to the bottom of the chassis alowing for the center diff to be set very low (low cg)
[Image: DSC015262.JPG]

Next are the spiral cut ring and pinion (TTR S3 was the first to come stock with these and the ones on the truggy have a small pinion and a large ring gear for the right gear ratio)
[Image: DSC015272.JPG]
[Image: DSC015302.JPG]
Nice thing about these is that you can run the buggy diffs, just swap out the ring and pinion gears. Best diffs I have ever run IMO

Front Rear and Center all completed
[Image: DSC015312.JPG]
[Image: DSC015322.JPG]
[Image: DSC015332.JPG]
[Image: DSC015342.JPG]
[Image: DSC015352.JPG]
[Image: DSC015362.JPG]
Lots of susension travel. Everything is stock except for the red stuff, and the carbon fiber stuff which i made.

And finished product
[Image: DSC015372.JPG]
[Image: DSC015382.JPG]
[Image: DSC015392.JPG]

just waiting on wheels tires and wing mount hope to have it before St. Louis. Truck went together very well kinda sucks that its an RTR so i kinda had to build it twice lol lets hope it run as good as it looks
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#1
Well here are some pics of my 16 hour build up of the TTR truggy. I am still waiting on some option parts etc.

First up some pics of the chassis and "z" brace, as well as a small plate that bolts to the bottom of the chassis alowing for the center diff to be set very low (low cg)
[Image: DSC015262.JPG]

Next are the spiral cut ring and pinion (TTR S3 was the first to come stock with these and the ones on the truggy have a small pinion and a large ring gear for the right gear ratio)
[Image: DSC015272.JPG]
[Image: DSC015302.JPG]
Nice thing about these is that you can run the buggy diffs, just swap out the ring and pinion gears. Best diffs I have ever run IMO

Front Rear and Center all completed
[Image: DSC015312.JPG]
[Image: DSC015322.JPG]
[Image: DSC015332.JPG]
[Image: DSC015342.JPG]
[Image: DSC015352.JPG]
[Image: DSC015362.JPG]
Lots of susension travel. Everything is stock except for the red stuff, and the carbon fiber stuff which i made.

And finished product
[Image: DSC015372.JPG]
[Image: DSC015382.JPG]
[Image: DSC015392.JPG]

just waiting on wheels tires and wing mount hope to have it before St. Louis. Truck went together very well kinda sucks that its an RTR so i kinda had to build it twice lol lets hope it run as good as it looks
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#2
and yes i know i have dirty hands, but thats what you get from cutting carbon fiber all day....Im still itchy!!! Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#2
and yes i know i have dirty hands, but thats what you get from cutting carbon fiber all day....Im still itchy!!! Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#3
That truck looks kick arse man!
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#3
That truck looks kick arse man!
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#4
thank you sir! makes u wanna get there buggy doesnt it Wink
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#4
thank you sir! makes u wanna get there buggy doesnt it Wink
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#5
God!!! Paint a body for yourself!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#5
God!!! Paint a body for yourself!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#6
LOL u dont like the RTR look????
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#6
LOL u dont like the RTR look????
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#7
sleeper style Big Grin
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
#7
sleeper style Big Grin
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
#8
I like your sticker job! LOL!!! ( get it instead of paint job! LOL!!! I crack myself up!)

Those Hotbodies steering links look nicccce on there !
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#8
I like your sticker job! LOL!!! ( get it instead of paint job! LOL!!! I crack myself up!)

Those Hotbodies steering links look nicccce on there !
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#9
sooo... what did you make outta carbon Fiber??? The top plate? center brace???
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#9
sooo... what did you make outta carbon Fiber??? The top plate? center brace???
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#10
yes sir, i made the slider also i have it on for some pics but switched it.

thank you for those links lol!
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#10
yes sir, i made the slider also i have it on for some pics but switched it.

thank you for those links lol!
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#11
Your welcome my lil long haired buddy!

How nice you stepped up to 2 classes and im gonna be in 1/8 now!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#11
Your welcome my lil long haired buddy!

How nice you stepped up to 2 classes and im gonna be in 1/8 now!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#12
i hope u come to ur senses and get a real buggy soon....mr jammin Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#12
i hope u come to ur senses and get a real buggy soon....mr jammin Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#13
well.... Maybe if GQ gets me a matching shirt ...
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#13
well.... Maybe if GQ gets me a matching shirt ...
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#14
Lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#14
Lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  My Tekno EB48.4 Build! Ponch 0 1,151 02-09-2021, 12:34 AM
Last Post: Ponch
  My latest scale build up Mnster 209 50,166 04-12-2012, 12:49 PM
Last Post: Mr. Tune
  Jammin CRT.5 Minni Truggy? Agd123 5 1,925 08-06-2008, 09:05 AM
Last Post: Tex
  Revo, a race truggy? snoracer 61 7,193 02-13-2008, 05:27 PM
Last Post: J-Dub
  Indoor Tires. Truggy, Boas And Holeshots? or just Boa J-Dub 9 1,595 01-15-2008, 01:02 PM
Last Post: J-Dub
  $300 rtr truggy for the beginners. DAVEC-NITRO-RS4 5 1,438 10-21-2007, 09:45 PM
Last Post: rocco79
  Possible AE truggy? Evil3 94 5,581 08-14-2007, 11:31 PM
Last Post: J-Dub
  Which tires for Truggy outdoor? motoxer4life 23 2,834 08-06-2007, 03:29 PM
Last Post: motoxer4life
  Scale 2.2 International Scout build Jeepguy 40 5,473 07-27-2007, 01:03 AM
Last Post: Jeepguy
  What truggy as a basher? motoxer4life 198 14,687 07-19-2007, 08:21 AM
Last Post: motoxer4life

Forum Jump:


Users browsing this thread: 1 Guest(s)