08-25-2007, 01:13 AM
What you gotta do, is when you get the new box, find the screw that you access thru the bottom of the box and adjust it so that the box's wheel starts spinning earlier when you push down on the lid.
Then, you CANNOT slam down on the motor like on other boxes to get it to start. You have to barely touch the flywheel to the box to get it to work correctly.
As always you can do other things to help also, loosen the plug like you did, preheat the motor, or get the updated losi flywheel which is 2-3x's wider than the older version.
Oh and switch the plugs to deans, and possibly even rewire the box with thicker wire (lower gauge).
Hope this helps.
Then, you CANNOT slam down on the motor like on other boxes to get it to start. You have to barely touch the flywheel to the box to get it to work correctly.
As always you can do other things to help also, loosen the plug like you did, preheat the motor, or get the updated losi flywheel which is 2-3x's wider than the older version.
Oh and switch the plugs to deans, and possibly even rewire the box with thicker wire (lower gauge).
Hope this helps.
Tekno EB48.4 HobbyWing XR8 Sanwa M12