12-12-2006, 01:46 PM
I mix good old blue windex and tap water in equal parts and keep it in a squeeze bottle. I reduce opaque Faskolor to about 6 parts paint to 4 parts thinner mix. For finer spray I go more like 5:5 or 4:6 on paint:thinner ratio and spray through a .35mm tip at roughly 20-25psi for most stuff. You can go thinner and use lower pressure, but too thin the paint gets real easy to blow around and run.
As for spatter and tip dry, I find FasWhite to be the worst for some reasons. Must be all that pigment. For white I really thin it, and crank the air pressure up.
As for spatter and tip dry, I find FasWhite to be the worst for some reasons. Must be all that pigment. For white I really thin it, and crank the air pressure up.