04-09-2007, 05:18 PM
This is the Werks Racing non-pull start Team Line .21 Off-Road
Pro 7 Racing Engine with SG (pilot) Crankshaft.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Ideal for larger circuits where horsepower and RPM are critical
All new crankcase design with a long stroke piston/sleeve and turbo
combustion chamber
Crankshaft inlet has been lightened and ramped with an epoxy filler
face of crankshaft is fluted and balanced with a tungsten insert
Slide valve carburetor with smaller 9mm steel slide for improved air
velocity just below the venturi insert
Oversized 10-fin cooling head, black in color
Rear exhaust
INCLUDES: Werks Racing non-pull start Team Line .21 Pro 7 Off-Road Racing
Engine with exhaust gasket, standard glow plug
REQUIRES: Fuel: Car blend with 15-40% nitro content
Glow Plug: OSMG2694
Track Equipment: Air filter depending on vehicle, tools
SPECS: Weight: 8.1oz (230g)
Displacement: .21 cu in (3.4cc)
Horsepower: 2.75hp @ 38,000RPM
Cylinder Bore: 0.65" (16.48mm)
Stroke: 0.64" (16.3mm)
Carb Bore: 0.31" (8mm)
Crankshaft Bore: 0.39" (10mm)
Crankshaft Diameter: 0.56" (14.2mm)
Carb opening outer diameter: 0.55" (14mm)
Distance between mounting holes same side: 0.83" (21mm)
Distance between mounting holes opposite side: 1.4" (37mm)
Width at bottom of crankcase: 1.2" (30.8mm)
Width including mounting flanges: 1.7" (44.2mm)
Height bottom of crankcase to top of cylinder head: 4.4" (112mm)
Height bottom of mounting flanges to top cylinder head: 3.8" (97.5mm)
Length from front of crankcase to end of crankshaft: 1.1" (29mm)
Length from backplate to end of crankshaft: 3.7" (93mm)
Length from backplate to front of crankcase: 2.5" (63.5mm)
jxs 9/13/06
ir/jxs
Pro 7 Racing Engine with SG (pilot) Crankshaft.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Ideal for larger circuits where horsepower and RPM are critical
All new crankcase design with a long stroke piston/sleeve and turbo
combustion chamber
Crankshaft inlet has been lightened and ramped with an epoxy filler
face of crankshaft is fluted and balanced with a tungsten insert
Slide valve carburetor with smaller 9mm steel slide for improved air
velocity just below the venturi insert
Oversized 10-fin cooling head, black in color
Rear exhaust
INCLUDES: Werks Racing non-pull start Team Line .21 Pro 7 Off-Road Racing
Engine with exhaust gasket, standard glow plug
REQUIRES: Fuel: Car blend with 15-40% nitro content
Glow Plug: OSMG2694
Track Equipment: Air filter depending on vehicle, tools
SPECS: Weight: 8.1oz (230g)
Displacement: .21 cu in (3.4cc)
Horsepower: 2.75hp @ 38,000RPM
Cylinder Bore: 0.65" (16.48mm)
Stroke: 0.64" (16.3mm)
Carb Bore: 0.31" (8mm)
Crankshaft Bore: 0.39" (10mm)
Crankshaft Diameter: 0.56" (14.2mm)
Carb opening outer diameter: 0.55" (14mm)
Distance between mounting holes same side: 0.83" (21mm)
Distance between mounting holes opposite side: 1.4" (37mm)
Width at bottom of crankcase: 1.2" (30.8mm)
Width including mounting flanges: 1.7" (44.2mm)
Height bottom of crankcase to top of cylinder head: 4.4" (112mm)
Height bottom of mounting flanges to top cylinder head: 3.8" (97.5mm)
Length from front of crankcase to end of crankshaft: 1.1" (29mm)
Length from backplate to end of crankshaft: 3.7" (93mm)
Length from backplate to front of crankcase: 2.5" (63.5mm)
jxs 9/13/06
ir/jxs
[url][/url]
IN GOD WE TRUST, ALL OTHERS MUST PAY.