Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Name your hop ups!!!
#1
Ok boys this is an r/c site lets talk about what kinda stuff we've blown our cash on for these things.

#1. Savage 21
Xtm 24.7 pro
Robinson racing spur
Ofna 16t clutch bell
Ofna three shoe clutch
Hpi heavy duty dogbones at all 6 places
Hotbodies dual disk brake
Hotbobies steel brake hub
Integy MSR5 piggy back shocks w/ 40wt oil
Hi-tec mg645 steering servo
Hi-tec mg625 trottle servo
Reedy 5 cell 1100ma NIMH pack
Team Losi Zombie maxx tires
Rpm heavy duty wheels
2 Speed gear upgrade
Savage 25 tank
Dynamite Big Daddy fuel filter
Futaba pm3 control (this mutha has abs brake ability!!!)
This is all i can remember right now, im sure when i look at it ill see more stuff. This doesnt count the the many crappy hop ups ive bought and gotten rid of (i.e. Hotbodies shocks, picco .26 outlaw,ect...)

# 2. Ofna 9.5 Violator buggy
Diff oil upgrade (7k,10k,3k)
Ofna Jammin pipe
Proline knuckles tires
Hi-tec mg645 steering servo
Hi-tec mg625 trottle servo
Reedy 5 cell 1100ma NIMH pack
Reply
#2
Savage .21

Dynamite Mach .26
16/49 Gearing
HPI Dual disk brakes
All steel brake hub
Hot Bodies pipe
50wt shock oil in the stock shocks
HPI 'black' springs
4 spider gear mod in the front and rear diffs
3000wt diff oil in the rear and 5000wt diff oil in the front
MP servo saver mod
Hitec 645 servo for the steering
HPI reverse module
Proline velocity wheels w/ bowties
5 cell 1200ma NIMH receiver pack
Motorsaver air filter
Heavy duty dogbones on the front axles
HPI Doge ram body painted blue with white racing stripes
*This list does not include the numerous stock parts that got broke and replaced. There might be some stuff missing from the list that I forgot.


HPI Sprint

All stock, will be turning it into a drift car.
Reply
#3
Jt Hybrid Maxx...... I've had this maxx since they came out so now.. well yeah too much to list.. lol! here is a current pic without any suspension.

[Image: JTmaxx_01.jpg]

I'm in the process of upgrading my old original maxx suspension it with Unlimited engineering Racer X suspension and matching CVD's.


_______________________

Kyosho Landmax 2

JT Racing chassis
OPS Pro buggy engine
AL shocks
center universals
MEdial Pro tarmac II tires
Gutted CVEC 170 pipe
either a subuaru WRX ody ot Alfa Romeo body
probably more that I'm forgeting.


I also have a hyper 7 with a ton of hop ups but its only a rolling chassis at the moment.

Those are my Nitro RC... I also have a few electrics. Smile
Reply
#4
WOW, I just read my old description and its note even close anymore, so here you go.

SUSPENSION:
Bulkheads- stock
Shocktowers- Racer X
Bulkbraces-RPM
Diff housing- stock
Diff brace-stock
Hinge pins-UE
Turnbuckles- UE
Pivot balls- stock
Pivot caps-UE
Upper arms- Racer X
Lower arms- Racer X
Knuckles- Racer X
Shocks- Big Bores all around (soon 1/8 scale)
Pistons- 2
Springs- Black all around
Oil- 60wt
Wheel hexes- ACNCM
Wheels- Pro line Velocity 40 series white dish, off-set
Tires- 40 series Bowties

CENTER SECTION:
Chassis- Full Force Spider
Lower braces- ACNCM
Skids- Hardcore Aluminium
Engine mount- Wasp
Throttle servo mount- Stock
Steering servo mount- Chassis Mount
Bellcrank- Stock
Servo saver- Kimbrough
Electronics boxes- Stock
Bumpers- None

DRIVELINE:
Engine- Wasp .21 SB Direct Drop In
Header- RC Solutions
Pipe- Jammin JP-2
Fuel tank- Hyper 7
Air filter- Motor Saver w/ prefilter
Flywheel- RRP vented
Clutch shoes- MIP
Clutchbell- Racers Edge vented 22T
Spur- RRP Dual Disk Slipper 72T
Transmission case- stock
Foward primary- stock
Foward output- stock
Brakes- RRP vented aluminium
Front driveshafts- MIP black
Center driveshafts- Stock
Rear driveshafts- MIP black
Ring & pinion- RRP Racing gears
Diff cup- stock
Spider gears- stock

ELECTRONICS:
Batteries- Homemade 2250maH NIMH Hump pack
Steering servo- Airtronics 94358 200oz
Throttle servo- Hitec 645MG
Failsafe- Venom
Battery indicator- Venom
On Board Temp- Venom
Transmitter/reciever- Airtronics M8 FM

BODY:
X-citer-Custom painted with XXX main mask (soon)
Stock- trashed beyond the staples holding it together
F-350- Red (coming soon......Hopefully)


[Image: picture366.jpg]

[Image: picture369.jpg]
Reply
#5
DO-U-MAXX, that's a nice looking cage! Does a body even fit on that?
Reply
#6
[Image: picture_274-1.jpg]

Yup. This pic is a little outdated as I changed the wheels and painted the cage.
Reply
#7
TMaxx-
XTM .21 Conversion (crap)
Dynamite Mach 26 motor
RPM arms
Lundsford titanium turnbuckles
Integy piggyback shocks
MIP CVD's
Robinson gears in trans
Traxxas forward only
Ofna 4-shoe clutch
Ofna 1/8 scale clutchbell
Ofna spur gear
Strobe slipper
Aluminum skids & bulkheads
Bad Horsie 2700mAh receiver pack
Hitec HS645MG hi tork steering servo
Hitec HS-something hi speed throttle servo

Yokomo GT4-
Integy 7075 chassis
Yokomo low-CG motor mounts
Yokomo low-CG flywheel
CVEC pipe

XRay M18-
Graupner Speed 300
Orion Mini-ESC
Orion 1200mAh

Associated TC3-
Factory Team turnbuckles
Trinity Kobal 13T
Factory Team aluminum body shocks
Factory Team aluminum CVD's
Peak 3300's

I also have-
Power Racing Swift buggy
HPI Super Nitro Rally
HPI Nitro MT
Team Losi Mini-T


Jeez, I need to sell some of this sh_t...
Reply
#8
6 day old Savage 25

Ballistic batteries 5 cell hump pack
motorsaver air filter
Ofna micro failsafe
HPI Q6 rims with HPI dirt bonz tires


Traxxas Emaxx
RPM bumpers, skids, a arms & shock/body mounts
Traxxas sport traxx tires and Proline maxx mashers on stock rims
Traxxas big bore shocks


Losi mini t
Reply
#9
Heres what I got in my maxx


--------------------------------------------------------------------------------
SUSPENSION:
Bulkheads- GA 7075
Shocktowers- UE Knucklehead
Bulkbraces- GA
Diff housing- UE
Diff brace- UE
Hinge pins- Ti
Turnbuckles- stock
Pivot balls- UE steel
Pivot caps- UE
Upper arms- UE EXT
Lower arms- UE EXT
Knuckles- UE EXT oversize bearings like the RPM knuckles
Shocks- 1/8th scale
Pistons- 2 hole
Springs- 1/8th scale
Oil- 60W
Wheel hexes- traxxas alum
Wheels- UE Starr racing rims, and some maximizer beadlocks
Tires- Bowties,Mulchers

CENTER SECTION:
Chassis- Supermaxx
Lower braces- UE
Skids- GA 3mm ti
Engine mount- UE
Throttle servo mount- UE
Steering servo mount-
Bellcrank- eliminated
Servo saver- UE Gen IV
Electronics boxes- stock
Bumpers- NONE

DRIVELINE:
Engine- Hyper .21
Header- RB
Pipe- RB 063
Fuel tank- OFNA
Air filter- RB
Flywheel- UE
Clutch shoes- UE 4 shoe carbon
Clutchbell- 18t
Spur- 51 T Strobe slipper
Transmission case-stock
Foward primary- UE
Foward output- UE FOC 6
Brakes- carbon
Front driveshafts- Mip's
Center driveshafts- UE ti's
Rear driveshafts- Mips
Ring & pinion- UE
Diff cup- UE
Spider gears- 8 gear

ELECTRONICS:
Batteries- trinity 1100 Mah
Steering servo- Hi-Tec 645MG
Throttle servo- Hi-tec 5625
Failsafe- NONE
Transmitter/reciever- JR XS3 / JR rs300
Reply
#10
lol.. sheesh Rich you must be real slow at work to have the time to list all that. Mabey I'll list everything on my Jt Maxx later on.
-- John --
1:1.. 01 Z28 Camaro A4 Sure.. its stock.
1:8's.. K3, Inferno GT, and a straight line beater car
1:18.. RC18t Mamba and 3s lipo
Reply
#11
he pasted it from showmerc.......I'm doing the same below, to much to re-type
Big Grin
SUSPENSION:
Bulkheads- aluminum
Shocktowers- Nova RC
Bulkbraces- RPM
Diff housing- stock
Diff brace-stock
Hinge pins-lundsford Ti
Turnbuckles- lundsford Ti
Pivot balls- stock
Pivot caps-stock
Upper arms- RPM
Lower arms- RPM
Knuckles- RPM
Shocks- Hyper 7 front shocks all around
Pistons- 2
Springs- Trinity light blue up front and Black out back
Oil- 50wt
Wheel hexes- stock
Wheels- Pro line Velocity white dish, off-set
Tires- SportTraxx

CENTER SECTION:
Chassis- Supermaxx Dace...Predator
Lower braces- Supermaxx/Dace
Skids- Hardcore TI
Engine mount- Dynamite w/heat sink
Throttle servo mount- Ofna
Steering servo mount- mounted direct to chassis
Bellcrank- Pro Line steering kit
Servo saver- see above
Electronics boxes- stock/none
Bumpers- none

DRIVELINE:
Engine- Sirio TX .18
Header- Sirio cut 1/2 inch off
Pipe- Sirio Big Bore Pipe
Fuel tank- Ofna
Air filter- Motor Saver
Flywheel- stock 2.5
Clutch shoes- MIP
Clutchbell- 20T
Spur- 72T
Transmission case- stock
Foward primary- stock
Foward output- stock
Brakes- Carbon fiber disc
Front driveshafts- stock
Center driveshafts- UE Ti
Rear driveshafts- stock
Ring & pinion- stock
Diff cup- stock
Spider gears- stock

ELECTRONICS:
Batteries- Ballistic Batts 1600mah NIMH rec. pack
Steering servo- Hitec 645MG
Throttle servo- Hitec 645MG
Failsafe- none
Transmitter/reciever- Futaba FM
Reply
#12
T-maxx .18

Front end.....

rpm bumper
rpm bulkhead brace
rpm a-arms
rpm axle carriers
rpm skid plate
sport trax tires
trinity black springs in corners


center......

hitec 645 for steering
hitec 625 for t/b
mx-3 fm radio system
carbon fiber disc brake
ofna fuel tank
sirio big bore pipe
rc raven chassis
1200mah hump pack
sirio .18 (hauls major @ss when tuned)
dynamite motor mount (upgrading to ue motor mount soon)
rpm center skid plate

rear end.....

rpm a-arms
rpm bumper
rpm axle carriers
rpm bulkhead brace
trinity black springs in rear corners


Other then that stuff im pretty much stock. As soon as i get it back together il take some pics of it.
Reply
#13
just to throw something new at you guys, i just ordered the RC solutions 2.5 CNC header. I have been looking at this thing since they came out, I just have not jumped on it....until now. i was having a problem denting my stock header with the .21 in there so now with the added clearance with the UE shocktowers I have the ability to use this new part without the threat of damaging it. I have not heard of anyone that actually uses this thing so I will have to test it for myself and see what happens. I called RCS and they said it was a little shorter and more direct of a flow path. Of course they say they all use it and love it, but hey, if I worked for them then I would say the same thing so I take their experience with a grain of salt. Should be in on tuesday, just in time for leisure on wednesday night. Wink and those there will be able to check it out.
Reply
#14
T-Maxx:
RC Raven Chassis
Integy Bulks/Chassis Braces
RPM Bulkhead Braces
RPM 3-piece skid set
RPM front arms/ Stock rear arms (Soon to change)
Modified RC Solutions roll cage (Cage broke, only running half)
RD Logics tuned pipe
Ofna Titan Aluminum Shocks (4)
Hi-tec MG-645 steering servo/ Stock throttle servo
Sport-trax tires on stock rims
Venom 1100 Mah hump pack
Stock 2.5 Engine


Savage:
All stock, with the exception of a JR Steering servo


Both trucks JR XR3 FM radio
Reply
#15
E Maxx:
RPM skid plates
RPM bumpers
RPM wide A arms
Proline Maxx Mashers
Traxxas Sport traxx on stock rims
Traxxas big bore shocks
Trinity springs


Savage 25:
Motorsaver air filter
Bad horsie shock socks
HPI Q6 rims w/Dirt bonz
HPI ribbed pipe
Ballistic batteries 5 cell pack
Nova pro cooling head
Proline Weld racing rims w/stock Savage tires and Trinity foams


Mini T:
Losi street tires
Losi 7.2v battery pack
Reply
#16
T-MUTT
Drive train
> Picco .26
> RRP steel gears in the trans
> RRP steel ring & pinion gears
> Rear spool
> Dynimite .21 conv.
> MIP cvds
> Clutch set up from a Monster GT(clutch bell,clutch shoes,flywheel,spur
> gear,)
> 17tooth cb,47tooth spur
> K&N air filter
> CVEX pipe
> Racers edge allum. trans case
> SUSPENSION
> RPM a-arms
> RPM axel carriers
> Pro-Line power stroke shocks
> Allum. bulk heads
> Fast Lane shock towers
> Hardcore Racing titanium skids(frnt&rear)
> Pro-Line steering kit
> Pro-Line titanium turn buckles
> RD Logics Allum rims
> Sporttraxx tires
> 40 series volocity rims
> 40 series bow ties
> Pro-Line paddles
> Du-Bro skies
> Slim Line allum tank
> Hardcore Racing allum. receiver case
> JR XS3 radio
> Hitec 645 steering servo
> OFNA fail safe
> Venom temp gauge
> And there's more i know im forgetting
____________________
MONSTER GT
rc solutions cage
picco .26
hcr titanium skids (all 4)
hitec 645 servo
gh allum shock towers
___________________
STORM
picco .26
titanium shock towers
_____________________
TC3+
sirio evo2 .12
dynamite rear exaust header and pipe
________________________-
REVO
stock
_______________________-
MENACE
allum a-arms
______________________-
XTR
in the middle of a make over.
______________________-
MINI-T
allum a-arms
allum bat. tray
allum shock towers
allum motor gard
allum bumper
allum servo bracket
allum axel cariers
rear ball diff
baja motor
_____________________-
MISS BUD, SHOCKWAVE 36
stock
10/8/1871- the great Chicago fire. Approximately 250 people were killed in the fire; 98,500 people were left homeless; 17,450 buildings were destroyed along with the original Emancipation Proclamation.
Chicago Local 281, protecting lives and property for over 100 years.
Lawn sprinklers save your grass, Fire sprinklers save your a$$
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)