+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: Pipe recomendations/ buggy (/thread-843.html)
Pipe recomendations/ buggy - Obsessive R/C - 08-07-2005
I was hoping to get some opinions on a good pipe for a RB WS7...
Currently I'm running an Ofna 063
I have a RB ERFA-9863 that I can try or I was looking at a JP-1
If anyone has any other tips they would like to offer feel free...
Pipe recomendations/ buggy - cemeb4dk - 08-07-2005
I like my Os 2050 its more of a low-mid pipe, but makes engine way more economical on fuel. I run it on my 777 with a P5x.
I run a Jp1 on my 528 in my lsp and it is a very good pipe also, I htink it allows more tope end than my OS.
Are you looking for more top/mid or low end
Pipe recomendations/ buggy - Obsessive R/C - 08-07-2005
I was leaning towards low end, this motor seems pretty strong mid to top.
Pipe recomendations/ buggy - cemeb4dk - 08-07-2005
If you want to spend around $60 I would go with the Jp1.
If you want to spend around $100 get the Os.
Like I said both are great and super strong stingers, OS is a little lighter and makes my vehicle a little more fuel economic.
Pipe recomendations/ buggy - Tex - 08-07-2005
Your RB 9863 is a low end pipe, I would try that... Is it a one piece or two piece RB pipe?
Pipe recomendations/ buggy - SixVi6-Camaro - 08-08-2005
I've heard a lot of good things about the Power Racing pipes..
053 pipe.. mid low end.
http://www.amainhobbies.com/product_info.php?cPath=23_32&products_id=2484
and 086.. mid high pipe..
http://www.amainhobbies.com/product_info.php?cPath=23_32&products_id=2485
but you can't go wrong with the JP pipes or any Novarossi/RB pipe.
Pipe recomendations/ buggy - Obsessive R/C - 08-08-2005
Tex Wrote:Your RB 9863 is a low end pipe, I would try that... Is it a one piece or two piece RB pipe?It's a 2-piece
Pipe recomendations/ buggy - Obsessive R/C - 08-08-2005
SixVi6-Camaro Wrote:I've heard a lot of good things about the Power Racing pipes..
053 pipe.. mid low end.
http://www.amainhobbies.com/product_info.php?cPath=23_32&products_id=2484
and 086.. mid high pipe..
http://www.amainhobbies.com/product_info.php?cPath=23_32&products_id=2485
but you can't go wrong with the JP pipes or any Novarossi/RB pipe.
Thanks for the link...
Pipe recomendations/ buggy - HAGASAN - 08-13-2005
If your running a RB WS7, I highly recommend running a RB,NR,Top, or REX 086 pipe, or 053 pipe. You are running a high end motor and it deserves a high end pipe. Those motors are not tuned for low end, because all the tracks in europe call for top end with not many jumps, therefor low-end torque is not something they need. If you want to get some bottom you must tune your clutch. You didnt post what kind of car you have or what clutch you are running. I recommend running the 1.1 springs, aluminum shoes, and maybe even drill a small 1/16 hole in the shoes to lighten them alittle for a later engagement. If your using carbon shoes do the same. This has been a good set-up for RB users.
Pipe recomendations/ buggy - Obsessive R/C - 08-13-2005
Nice post, thanks for the info.