+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Open Forums (https://www.chitownrc.com/forum-5.html)
+--- Forum: Buy / Sell / Trade (https://www.chitownrc.com/forum-13.html)
+--- Thread: wanted roller (/thread-6204.html)
wanted roller - nitrodude - 03-06-2007
I want a cheap roller that can use a torq .16 engine. lmk what you have
thanks
wanted roller - Hoobajoob - 03-06-2007
addictedtonitro has a roller xxx-nt
wanted roller - nitrodude - 03-06-2007
I want something cheap?
wanted roller - Hoobajoob - 03-06-2007
cheaper than $100?
wanted roller - nitrodude - 03-06-2007
Its said 200
wanted roller - Hoobajoob - 03-06-2007
200? you may want to reread that thread.......
wanted roller - nitrodude - 03-06-2007
ooh 150 with servos and 100 without.
I want servos with the roller and hopefully radio, for 100 or less i dont have to much money now.
wanted roller - Hoobajoob - 03-06-2007
i see
wanted roller - nitrodude - 03-06-2007
ya so if you find any cheaper ones or if you have one for cheap lmk
thanks
wanted roller - AddictedtoNITRO - 03-06-2007
I got a nitro rs4 roller with servos and ofna am radio/reciever. just needs a engine. $100 has quite a few upgrades. I think the servos are hitec. It hasn't been run in a while
wanted roller - Hoobajoob - 03-06-2007
nice car ive seen it.
wanted roller - Astro - 03-07-2007
Post some RS4 pics please, may be interested for myself.I have 1 already and two would be cool.
wanted roller - AddictedtoNITRO - 03-07-2007
gotta take some give me a few
wanted roller - AddictedtoNITRO - 03-07-2007
ok here are some pics. I didn't have a chance to dig out all the parts I have for it. I know I have some nip parts like a muffler, pody posts, linkages,etc. I also have a 2sp clutch bell for it. It has a 2sp upgrade on it now. The only known problem is a small crack in the upper top plate. It is carbon fiber also. I never had a prob with it though. Maybe a dab of shoe goo if your concerned. Ot has alum shock towers, Alum steering bell cranks, rpm turnbuckles, all top chassis are cf, airtronics 94102 throttle and same on steering. Will prob need new belts soon also as they have been sittin quite a while. If I can dig out the rest of the stuff I'll post another pic for ya
Jeff
wanted roller - AddictedtoNITRO - 03-07-2007
wow my camera sucks today
wanted roller - Czech-it-Out Graphics - 03-07-2007
dude thats a super nitro isnt it? man looks like mine i got it all pimped in alum and stuff too
wanted roller - AddictedtoNITRO - 03-07-2007
dude you know what I don't even know the diffrence between the 200 rs4's out there lol. I think it is a 1st gen rs4. I was lookin at all the stuff done to it and the parts I have and was like damn 100 bux only lol oh well gotta stick to my word.
wanted roller - Czech-it-Out Graphics - 03-07-2007
it looks like it, what size bodies does it take 200mm or 300mm if a 200mm is way to short then it is a super nitro lol
wanted roller - AddictedtoNITRO - 03-07-2007
ha the only body I have is the one that came with it lol. I got some new rims for it back when and they were the smaller ones I think. I'm pretty sure it's a reg. How long is your car? I'll get the tape out lol
wanted roller - Czech-it-Out Graphics - 03-07-2007
its 280mm or 300mm depending on which way u mount the arms
pretty cool too bad i havent run it in 4 yrs hahaha
wanted roller - AddictedtoNITRO - 03-07-2007
Czech-it-Out Graphics Wrote:its 280mm or 300mm depending on which way u mount the armsgeesh 4? I'm at about 15 inches total car so I think it's the regular one.