Losi 8ight part number - Printable Version +- ChitownRC (https://www.chitownrc.com) +-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html) +--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html) +--- Thread: Losi 8ight part number (/thread-5654.html) |
Losi 8ight part number - son1cn - 01-10-2007 i got the 8ight RTR and i am wondering what the part number is on the big ass screws that screw into the motor mount, because my manual sucks. Thanks Losi 8ight part number - UE-Maxx - 01-10-2007 https://www.tonysscrews.com/displayProductDocument.hg?productId=310&categoryId=2 Losi 8ight part number - Thirdgen89GTA - 01-10-2007 Right, Son1c asked me what they were, I recomended he ask you guys since i don't know what it is and don't have an 8. I'm also not going to get into the Tony's screw kit debate again. Does anyone know what thread pitch, length, and head size the stock chassis engine mount screws are? Losi 8ight part number - kevinF - 01-12-2007 these connect the engine to the mount...http://www.amainhobbies.com/product_info.php/products_id/5813 these connect the engine + mount to the chassis...http://www.amainhobbies.com/product_info.php/products_id/7762 also DO NOT get tonys screws, just get the stock, I have gotten the tonys screw kit and nothing but trouble Losi 8ight part number - Tex - 01-12-2007 explain "trouble" so people know where your coming from. Losi 8ight part number - Czech-it-Out Graphics - 01-12-2007 sounds like they suck if they are trouble lol Losi 8ight part number - Tex - 01-12-2007 I want to know why they suck, instead of throwing opinions around give them some base Losi 8ight part number - SLOW REVO - 01-12-2007 Tex Wrote:I want to know why they suck, instead of throwing opinions around give them some baseThey suck Because someone told me that they do, And Because i cant afford them.mash: Oh, And my cheap tools keep rounding out the heads, How many more reasons do you need.:joy: Losi 8ight part number - kevinF - 01-12-2007 well the "trouble" i have had is that they strip out after you take them out and put them back in about 5 times or so, atleast thats how mine were. i dunno maybe it was my tools, but i was using the dynamite ones and they stripped alot. i gave traxxas junkee a few that he needed on his buggy and they to stripped using his tools Losi 8ight part number - UE-Maxx - 01-12-2007 I used hudy tools with my mbx-5 and TTR tools with my 8ight. No problems with the screws. I also didn't have any problems with my Predator that had tony's screws. Losi 8ight part number - Tex - 01-12-2007 traxxas thrasher Wrote:well the "trouble" i have had is that they strip out after you take them out and put them back in about 5 times or so, atleast thats how mine were. i dunno maybe it was my tools, but i was using the dynamite ones and they stripped alot. i gave traxxas junkee a few that he needed on his buggy and they to stripped using his tools if your talking about the dynamite drivers I gave you, those were on their last leg and the hex was rounded pretty decent. I used those for 2 years Losi 8ight part number - Eddie F - 01-13-2007 if its not made by one of mikes sponsors then it sux . Losi 8ight part number - kevinF - 01-14-2007 well then tex maybe they will be good, i forgot about those being old |