Thurs Practice - Printable Version +- ChitownRC (https://www.chitownrc.com) +-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html) +--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html) +---- Forum: Leisure Hours Raceway (https://www.chitownrc.com/forum-12.html) +---- Thread: Thurs Practice (/thread-4984.html) |
Thurs Practice - SLOW REVO - 11-02-2006 Anyone going to the track tonight for practice. Thurs Practice - Tex - 11-03-2006 I guess that's a no....ha Thurs Practice - SLOW REVO - 11-03-2006 Truck ran good. Now i just need to learn how to drive. If it was in the building i hit it, Broken parts 1 red pushrod two axles Thurs Practice - Traxxas_Junkee - 11-03-2006 Axels? Jeez. You need to lay off the throttle when landing. Thurs Practice - DAVEC-NITRO-RS4 - 11-03-2006 "Now when you go back on the track, I want you to hit the Pace Car." "Hit the Pace Car???!!!!" "Yep, I figure you've hit everything else out there, and I just want you to be perfect!" - Days of Thunder - Thurs Practice - Casketman - 11-03-2006 How did you pull of busting the axles? Thurs Practice - Eracer76 - 11-03-2006 DAVEC-NITRO-RS4 Wrote:"Now when you go back on the track, I want you to hit the Pace Car."LOL that was funny, I just watched that movie again last week Thurs Practice - satoch - 11-03-2006 Slow Revo, have you looked into the 8mm RD Racing axles I told you about yesterday? Thurs Practice - SLOW REVO - 11-03-2006 satoch Wrote:Slow Revo, have you looked into the 8mm RD Racing axles I told you about yesterday?Not yet just got home from work. is rd racing & rd logics the same company Thurs Practice - Ponch - 11-03-2006 NO Rd Racing=Good Rd Logics=Crap Thurs Practice - Michowski - 11-03-2006 are you running 23mm wheels slow revo? Thurs Practice - SLOW REVO - 11-03-2006 Michowski Wrote:are you running 23mm wheels slow revo?Yes. That is wherre they broke right where the threads end Thurs Practice - Michowski - 11-03-2006 I would stay away from them and just run stock size or 17mm. May I ask why your running the 23mm on the revo? Thurs Practice - Ponch - 11-03-2006 That's odd, I never broke that part of the axle with the 23mm setup. I broke the axle pins. Are the hexes shimmed away from the axle carrier properly? Thurs Practice - Eracer76 - 11-03-2006 23mm hexes suck, at least the Proline ones I had did. Back when I had the Losi LST, I started breaking axles every time I went to the track after installing 23mm hexes. They would break right at the hex where the thread starts every time, and I never had any problems breaking axles before getting them. Later I just sold the truck and bought the HB LSP....I ran the 14mm wheels the whole year and a half that I owned/raced it, with no problems at all. Thurs Practice - SLOW REVO - 11-03-2006 Ponch Wrote:That's odd, I never broke that part of the axle with the 23mm setup. I broke the axle pins. Are the hexes shimmed away from the axle carrier properly?Yes, I shimmed them. I never had this happen with the stock wheels Thurs Practice - SLOW REVO - 11-03-2006 Eracer76 Wrote:23mm hexes suck, at least the Proline ones I had did.These where the proline adapters. I ordered a set of boa c for the stock rims. Im going to try them and see what happens Thurs Practice - Michowski - 11-03-2006 Stick with stock rims or 17mm. The 23 are just to big and honestly there is no need for them. I ran the 17mm with the rd carriers and never once broke an axle, or had bearing problems. Ditch the 23mm, im saying this from experience. Thurs Practice - Casketman - 11-03-2006 I run Dace 23mm with Rpm carriers and I have yet to have a single problem with them. I had the HPI 17mm adapters on and I broke 2 stud axles during the classic practice and qual day. Said screw it and went back to 23's |