ChitownRC

Full Version: crt setup help
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
i need help setting up my crt for liesure hours. does anyone have any setup for the crt i should try out or any tips to help set it up
if you do a search on here you will probably find where alot of guys left off, not alot of peeps running that anymore but it is still a good truck.
well ive been searching i found the crt thread. oh well ill just run my buggy i should get better at one thing then sucking at 2 things
Yeah I bet you can suck 2 things..LOL!
your just wrong go hack some more people
What ev
IMO I would save the truggy for outdoor man, track too small, truck too big. Just driving buggy will make you a much better driver than a truggy anyways.
chickenfarmer3 Wrote:IMO I would save the truggy for outdoor man, track too small, truck too big. Just driving buggy will make you a much better driver than a truggy anyways.

thats what im going to do ill be there this sunday for racing
You should be able to find Chad Bradley's set-ups sheet on-line on the Ofna site but if not this is from a friend in California that use to race the CRT and he sent this to me for someone else I was helping at one time.

Front:
5000 Diff oil
"B" suspension blocks
60wt Associated oil, stock springs & pistons
Shock position: Upper middle hole on tower, inside on arm
Middle Ackerman position
Upper roll-center upper hingepin position
-2 camber, +1 toe out
Proline Crime Fighter MT tires w/Racers Edge 2-stage foam

Middle:
3/4 filled w/10,000, 1/4 filled w/30,000 diff oil
Stock gearing, 13t clutch bell
UE / Supermaxx flywheel
UE / Supermaxx 3.0 aluminum shoes w/ 0.9 springs
Dace custom one piece motor mount

Rear:
3000wt diff oil
Stock anti-squat plate
Stock -2.5 deg. aluminum rear toe block
Middle wheelbase setting
Book camber link locations
55wt GS shock oil
Gray Mugen MBX-5 big-bore springs
Shock position: upper row, 3-holes out from innermost hole on tower, middle on arm
-2 camber
Proline Crime Fighter MT tires, Racers Edge 2-stage foam

Stock body, CRT body wyellow buggy wing cut 1/4-in. off each side & reattached.
Engine: Novarossi "EB Mod" 528XR engine
O'Donnell 97T glow plug
Byon 30% fuel
Mugen MSR1005 pipe/header
cool ill hold off im going to run chad's bradleys setup for outdoors.
yeah running a truggy will NOT improve your buggy skills at all Eli in fact the truggy will prb. hurt your buggy skills more then help. just my .02 worth let the flame begin
+1 ryan. very correct.
thank you Chad, on a side note u take pay-pal for your stickers?
yupper.