Hey guys,
I am looking to buy a flywheel kit for the losi, we need it to race and it is sold out everywhere. I only need the collet in this kit, but of course you have to but the whole thing. Let me know if anyone can help us out with this.
Thanks.
hey lynn, if you guys wanna run a mugen setup I have a spare flywheel, collet, and nut. you will just need some mugen alum shoes and 1.0 springs.
let me know.
I SHOULD have a spare set-up I will check once I get home.
If you just need the collet, and have one from a different clutch setup and a dremel, you CAN make it work. That's what I'm using now. All you have to do is shave a little off the small end, and a good amount off of the large end until it sits in the back of the flywheel with just a bit sticking out towards the engine.
some one said one off of a .12 motor will work... lemme see if i can get a number
losa9376 is the losi collet for 1/10 trucks. the associated collet for the rc10gt is the same
arron waldron just posted this too...
The XXX-NT/AD2 flywheel collet works on the 8IGHT, it's part number
A-9376.
thanx cheesecake!!!!!
no problem losi has used the same collet since the losi gtx came out in the early 90's
Thanks guys that will help us out alot.