11-18-2006, 04:40 PM
I have four of these for sale......... LMK.
3 Left....2 Left Only. LMK
8IGHT 1/8 4WD Competition Buggy Kit
Retail: $999.99
mash:
Product Number: LOSK0800
Product Information
------------------------------------------------------------------------Features
Unique narrow chassis configuration for quicker handling and ground clearance
Innovative drivetrain layout with centrally mounted engine
Oversized shocks with threaded hard anodized shock bodies
Centrally located dual stage air cleaner
4mm thick machined and hard anodized aluminum chassis plate
Removable one-piece radio tray with separate boxes for the receiver and battery
Two battery box tops for different size receiver packs
Staggered brake disk sizes for better brake balance and feel
Sealed front and rear differential housings keep dirt out of the gears
Zero bump steer design with adjustable Ackerman
Captured hinge pins require no retaining clips
Machined premium aluminum 5mm thick alloy shock towers
Four shoe easily tuned clutch with oversized inner bearing
Overview
The Team Losi 8IGHT redefines 1/8 off-road nitro buggy racing with the first new and unique buggy design in over 10 years.. The 8IGHT uses the same innovative thinking, sophisticated technology, hi-tech materials, and cutting-edge design that has separated Team Losi's racing vehicles from the rest of the pack for over 25 years. The look is different, the handling has been vastly improved, and the features are endless. From the centrally mounted motor, to the oversized shocks, to the 4-shoe clutch, to the extra-thick machined chassis, everywhere you look there are ingenious features that yield both performance and durability. The revolutionary drivetrain, meticulous attention to detail and brilliant design are simply unmatched. The 8IGHT offers the enthusiast a 21st century off-road racer that is easy to tune, easy to maintain, and most of all easy to drive fast.
Starter Box Modification:
To help prevent the chance of pebbles locking up the flywheel, the 8IGHT was designed with a smaller hole where the starter wheel bumps against the flywheel. Most starter boxes will work, but if you have a starter box with a wide wheel, then you will need to chamfer the edges with a file (Reference the red triangles in the pictures below). Be sure to use eye protection. It is also critical that your 8IGHT chassis is lined up "perfectly" with the starter wheel on the starter box. We recommend doing this while you’re assembling your 8IGHT after Assembly Bag F.
Chamfer the edges of your starter wheel. Please wear eye protection while filing.
Make sure your 8IGHT lines up perfectly on your box.
Tech Notes
You will need...
.21 Buggy Engine
Tuned Exhaust System
2 channel radio system w/high torque servos
Paint for polycarbonate bodies
Starter box
Assembly/maintenance tools
Specifications
Type: Competition Buggy Kit
Scale: 1/8
Length: 19.5" (495mm)
Width: 12.13" (308mm)
Wheelbase: 12.64"- 12.80" (321-325mm)
Chassis: 4mm Hard-Anodized 7075 T-6 Aluminum
Suspension: H-Arm, fully independent
Drive Train: Offset drive with 3 sealed differentials
Tire Type: Team Losi Step-Pin
Motor or Engine: Not Included (.21 rear exhaust required)
Wheel Size: 17mm hex
Kit/RTR: Kit
Shock Type: Oversized hard anodized, threaded bodies / 4mm shafts
Body: Clear racer type
Ball Bearings: Complete
3 Left....2 Left Only. LMK
8IGHT 1/8 4WD Competition Buggy Kit
Retail: $999.99
mash: Product Number: LOSK0800
Product Information
------------------------------------------------------------------------Features
Unique narrow chassis configuration for quicker handling and ground clearance
Innovative drivetrain layout with centrally mounted engine
Oversized shocks with threaded hard anodized shock bodies
Centrally located dual stage air cleaner
4mm thick machined and hard anodized aluminum chassis plate
Removable one-piece radio tray with separate boxes for the receiver and battery
Two battery box tops for different size receiver packs
Staggered brake disk sizes for better brake balance and feel
Sealed front and rear differential housings keep dirt out of the gears
Zero bump steer design with adjustable Ackerman
Captured hinge pins require no retaining clips
Machined premium aluminum 5mm thick alloy shock towers
Four shoe easily tuned clutch with oversized inner bearing
Overview
The Team Losi 8IGHT redefines 1/8 off-road nitro buggy racing with the first new and unique buggy design in over 10 years.. The 8IGHT uses the same innovative thinking, sophisticated technology, hi-tech materials, and cutting-edge design that has separated Team Losi's racing vehicles from the rest of the pack for over 25 years. The look is different, the handling has been vastly improved, and the features are endless. From the centrally mounted motor, to the oversized shocks, to the 4-shoe clutch, to the extra-thick machined chassis, everywhere you look there are ingenious features that yield both performance and durability. The revolutionary drivetrain, meticulous attention to detail and brilliant design are simply unmatched. The 8IGHT offers the enthusiast a 21st century off-road racer that is easy to tune, easy to maintain, and most of all easy to drive fast.
Starter Box Modification:
To help prevent the chance of pebbles locking up the flywheel, the 8IGHT was designed with a smaller hole where the starter wheel bumps against the flywheel. Most starter boxes will work, but if you have a starter box with a wide wheel, then you will need to chamfer the edges with a file (Reference the red triangles in the pictures below). Be sure to use eye protection. It is also critical that your 8IGHT chassis is lined up "perfectly" with the starter wheel on the starter box. We recommend doing this while you’re assembling your 8IGHT after Assembly Bag F.
Chamfer the edges of your starter wheel. Please wear eye protection while filing.
Make sure your 8IGHT lines up perfectly on your box.
Tech Notes
You will need...
.21 Buggy Engine
Tuned Exhaust System
2 channel radio system w/high torque servos
Paint for polycarbonate bodies
Starter box
Assembly/maintenance tools
Specifications
Type: Competition Buggy Kit
Scale: 1/8
Length: 19.5" (495mm)
Width: 12.13" (308mm)
Wheelbase: 12.64"- 12.80" (321-325mm)
Chassis: 4mm Hard-Anodized 7075 T-6 Aluminum
Suspension: H-Arm, fully independent
Drive Train: Offset drive with 3 sealed differentials
Tire Type: Team Losi Step-Pin
Motor or Engine: Not Included (.21 rear exhaust required)
Wheel Size: 17mm hex
Kit/RTR: Kit
Shock Type: Oversized hard anodized, threaded bodies / 4mm shafts
Body: Clear racer type
Ball Bearings: Complete
