my am reciver went out in my maxx...i know i sohuld upgrade but i just need something to get by on right now....let me know what u got
i may have an old novak one, i will check tomorrow
I have two. Stock Traxxas from a Maxx.
if you still have reverse its 3 if you dont its 2, i might have a 3 ill look tomorrow, but it will probally need an antenns so just with UE
then i need a 2 channel..sry been a long day
you can still run a 3 channel just dont plug anything into the 3rd channel, or if you want more power plug the power into 3 and the servos into 1 and 2. I have two 3 channels in both my trucks and the trucks only need to channels.
if i plug the power pack into 3 it works better than in the batt spot?
got a stock hellfire radio from hpi if your interested. Controller and reciever. 20 bucks
no i dont. Just a stock radio from a rtr is all.
I didn't have reverse, but it still came with a 3 channel receiver. I will sell it for 7 shipped.
aight im gonna go with ue-maxxs one fits the quik fix budget..lolu willing to meet up this weekend?
I don't know. I will have to see what is going on.
If you have a reciver pack it will work better because it allows more power to get to the servos, the BATT plug has a limiter on there and doesnt allow as much power to go thru, i plug it into channel 3 and i get more power out of the pack, just might drain the pack a little faster.
hmm i didnt know that..im gonna have to try when i get the new reciver..
Traxxas_Junkee Wrote:If you have a reciver pack it will work better because it allows more power to get to the servos, the BATT plug has a limiter on there and doesnt allow as much power to go thru, i plug it into channel 3 and i get more power out of the pack, just might drain the pack a little faster.
Kyle, that's only on the JR RS310.
it worked better on all of my AM ones, I tried it when travis got his and we had to change out the reciver, it worked better on the 3 channel traxxas.
Revo2k Wrote:Kyle, that's only on the JR RS310.
Actually that's on the RS300. The RS310 fixed the issue.
DAVEC-NITRO-RS4 Wrote:Actually that's on the RS300. The RS310 fixed the issue.
Oh...now you tell me
J/K Dave
I did tell you that!!! It was so frikkin cold that day you couldn't hear me over your chattering teeth. Talk to Mr. Tune and he'll solder in the fix for like $2....or less !
Why do you think 310's cost more than 300's, because they are smaller? Well, that too.
DAVEC-NITRO-RS4 Wrote:I did tell you that!!! It was so frikkin cold that day you couldn't hear me over your chattering teeth. Talk to Mr. Tune and he'll solder in the fix for like $2....or less !
Why do you think 310's cost more than 300's, because they are smaller? Well, that too.
:bustingup It was
cold out there, 16 degrees I believe.