ChitownRC

Do you think this truck is worth it? ebay LSP LINK CLICK HERE i dont know a whole alot about lsp's but i know i like them.

get one hooked up with KHZ parts...You'll want the chassis braces and stuff from them anyway so might as well buy one already loaded, people are switching to the jammin' CRT

Ya thats what im thinking.

Ok so who wants to sell a lsp

did you check the forsale section at s-grid? People over there usually have really good deals and they are usually really hooked up

you should look at a new pro-r. I have seen them for $425 on ebay. they have most of the hop-up parts on them. not King Headz but they look good.

For Sale – Hot Bodies Lightning Stadium Pro

Completely sorted out, ready to race truggy. Fast, reliable and easy
to drive. Truck was brought new at the start of the 2005 season.
Includes:

- Optional 7075 chassis and shock towers (the stock LSP comes with 6061
parts)
- Custom aluminum chassis brace which eliminates any clutch bell strikes
- Hardened droop screw contact points on chassis
- Kyosho front hinge pin brace
- Reinforced Hot Bodies Ackerman slider
- Hot Bodies Option Part front chassis brace
- Ofna Violator 145cc tank
- Craddock quad brake disc setup
- Hot Bodies Option Part pipe mount
- Racers Edge rear toe plates (1, 2 and 3 degree plates – all three
included)
- Complete Tony’s Screws hex head screw kit installed
- Custom aluminum rear wing mount – won't break! Proline rear wing
- Hot Bodies Option Part rear CVDs (stock LSP comes with dogbones)
- Racers Edge 3.5mm aluminum rear shock ends
- Sportwerks full thickness 3.5mm Ti-Ni coated shock shafts on rear
shocks
- Complete set of four each red (soft) and blue (firm) Hot Bodies
Option Parts springs – one pair of each are new in package, one pair of
each are used
- Four Panther Boas mounted on Proline Velocity wheels with Proline
Firm Grey foams
- Four Proline Bowties on Proline Velocity wheels with Racers Edge 3
stage foams
- Four stock Hot Bodies wheels (dyed black) and tires, no foam inserts,
unmounted, never used
- Hot Bodies Option Part billet motor mount

$350 plus shipping

Is the truck worth it?

yes...IMO

I would wait for the LSP pro's to speak up though. I have never owned a LSP

I dont see any custom center braces on that truck, there are no optional shock towers. Not sure what a reinforced ackerman arm is, I am assuming to stockones on top of each other. Also note you will need to continue to buy those shock shafts since they are 3.5mm. The stock ones are 3.5 but taper down to 3.0 at the shock end.


Before I bash this truck, let me ask you a few questions?
1) what is your budget
2) do you need an engine/pipe and electronics
3) are you a hop up guy/or a stock guy
4) IS this strictly for racing?
5) any other mt's you own

cemeb4dk Wrote:I dont see any custom center braces on that truck, there are no optional shock towers. Not sure what a reinforced ackerman arm is, I am assuming to stockones on top of each other. Also note you will need to continue to buy those shock shafts since they are 3.5mm. The stock ones are 3.5 but taper down to 3.0 at the shock end.


Before I bash this truck, let me ask you a few questions?
1) what is your budget
2) do you need an engine/pipe and electronics
3) are you a hop up guy/or a stock guy
4) IS this strictly for racing?
5) any other mt's you own

#1 I have a pretty good budget
#2 Yes i will need an engine and electronics
#3 I like hop ups but only if they really inprove performance and if i have extra cash
#4 Yes racing
#5 Traxxas revo

Ok,

Here are my suggestions:

I would get the pro r version ( it has the new 7075 chassi and carbon fiber hop ups already and better tires) around $400

Then I would get the King headz ackerman arm, rear toe plates, radio tray posts for starters, approx $60-75

You are getting a new radio for xmas correct? If so all you need is a receiver (dsm or fm what ever your getting) approx $60

All your revo will will fit on it if you are using 14mm hexes still.

I woudl also buy a tonys screw kit $40

Now you can choose your engine and pipe combo, that all depends on budget and what you want and if you want pull start or bump box

This way everything is new and you know how it has been used or abused.


Check out http://www.truggyracers.com for some more info

Here is my revo LINK!!!!!!!!!! , yes im getting a m11 for christmas. I do like the collari b7's not sure whats better though.

So post up the LSP you bought!!!

Yeah i wanna see it too

Soon as i get back home ill put them up. I havent recieved it yet, its in the mail. But i will post the pics that i do have of it.