gas trucks

[willitbme15]

Originally Posted by Czech-it-Out Graphics

he wasnt talking to u

depends on if u wanna race or not, u wanna race get the get

i didnt think so,

im thinking about racing cuz ill b driving soon

thanks for the advice, u too addicted

[Eddie F]

Dayton is my hero

[willitbme15]

wut engines r u (allan) and john running in ur gt2s?
or anyone else w/ suggestions?

[1armed1]

Originally Posted by Eddie F

Dayton is my hero

I didn't do it, it was the two handed guy I swear!


WTF did I do???

[allan42r]

Originally Posted by willitbme15

wut engines r u (allan) and john running in ur gt2s?
or anyone else w/ suggestions?

i have a dynamite rear exhaust rotary carb, sg shaft that i will be using. the gt2 is setup to use this kind of motor so it will drop right in. this is a 3/4 hp motor that i think will be the perfect choice and ira is going with the os tg 1/2 hp that is also a rear exhaust,sg shaft,rotary carb. the os will be a good indoor motor but it wont be fast enough outdoor on the larger pro series tracks. the dynamite should do well on both and they are both about the same price. there are other motors that can be used like the tz WAY TOO MUCH hp or many side exhaust mills but keep in mind this is a 2 wheel drive truck that if you plan on racing the more hp motors will only be harder to drive. = buy the gt2 , a rear exhaust dynamite motor and come out and have fun with us

[willitbme15]

Originally Posted by allan42r

i have a dynamite rear exhaust rotary carb, sg shaft that i will be using. the gt2 is setup to use this kind of motor so it will drop right in. this is a 3/4 hp motor that i think will be the perfect choice and ira is going with the os tg 1/2 hp that is also a rear exhaust,sg shaft,rotary carb. the os will be a good indoor motor but it wont be fast enough outdoor on the larger pro series tracks. the dynamite should do well on both and they are both about the same price. there are other motors that can be used like the tz WAY TOO MUCH hp or many side exhaust mills but keep in mind this is a 2 wheel drive truck that if you plan on racing the more hp motors will only be harder to drive. = buy the gt2 , a rear exhaust dynamite motor and come out and have fun with us

i definately will thanks

[1armed1]

Who's in for gas truck this weekend?
Myself and Zippy will be there with ours.

[allan42r]

ira and i are still working on ours, but we should be in! truck will be done tonight and we will be breaking in our motors on sat.

[allan42r]

talked to cory and josh and they both want to run the gas trucks this winter!

[slim]

all this talk of gt on the 4th... where were yall?

laid the smak down with daytons kids truck... shiz was dialed!

think im gonna run it for the state race, watch out sukkas! rtr gonna whoop up on yall

[MaxxGS]

I know this thread is old but I have a question.

I just built my GT-2 kit and have found the 2 starter boxes I have the wheel diameter must be to large because it hits the chassis opening before it contacts the flywheel?

The starter box wheel fits the width of the slot but the wheel wont go up high enough to contact the flywheel because it hits the ends of the slot.

Should I open up the hole in the chassis or get a different box?

Anyone with any ideas please let me know and what starter box are you guys using on the GT-2?

[1armed1]

I'm using a extremely old serpent box for my gt2.
I had to narrow the wheel but the overall diameter was ok.

[MaxxGS]

Thanks, 1armed.

[Toughtrax]

So whats the 1/10th class going to look like for the summer anyone planning on running it or are you all going to bust out the Truggys again for the outdoor season?

[motoxer4life]

Ill prolly race buggy and gt, what tires are everyone using on the gt's? Switches or pink tapers?

[Ponch]

pink tapers own all

[Czech-it-Out Graphics]

lotta guys been liking the jconcepts dd's in green compound. GQ said they were better than tapers