The Official Mugen Thread

[chickenfarmer3]

...not me...

[Casketman]

I didnt do it

[allan42r]

wasnt me . anyone see that movie rocketman couple years back the two guys are on mars hooked together with there space suits and the one lettin out some nasty gas and keeps saying it wasnt me.

[chickenfarmer3]

wasnt me

[Ponch]

Found out something...Either the oil was too thin, worn out, or underfilled (I'm guessing it was a combo of the 3) in the shocks. It seemed thin, black, and the shocks were only about 4/5 full. Now filled with correct oils and feels better, doesn't bottom out from a foot drop any more.

[chickenfarmer3]

hmmm, but can you drop it from 3 foot like mine and it not bottom???

thats good man, good idea to put a small piece of air filter foam under the bladder too just to help it from compressing.

[allan42r]

we'll put some foam under the shock bladders and make sure your setup right on sun

[chickenfarmer3]

hahahah ^^ beat ya....

[Ponch]

God I feel like Meatwad right now...Not gay but just getting alot of help setting up shit lol


And man, those bladders are marble sized...Huge mofo's.

[chickenfarmer3]

good service....

[Ponch]

Anybody that's got some calipers handy, what is your amount of preload clips on your shocks and shock length f/r?

[chickenfarmer3]

bones level front and rear.

[Ponch]

Ok what I got on there right now for preload f/r=6mm/3mm
And overall shock lenght, from screw head on bottom to bottom of threads on top, f/r=103mm/126mm.

I'll check how it sits in a minute.

[allan42r]

with the car ready to hit the track /with fuel ya bones level and the droop should be at 10.5 mm from the bench to the bottom of the a arms while the car's sitting on two rims

[Ponch]

Bones level front, about 1mm above in rear, but that's no gas, wing, or body.

Originally Posted by allan42r

with the car ready to hit the track /with fuel ya bones level and the droop should be at 10.5 mm from the bench to the bottom of the a arms while the car's sitting on two rims

Lost here a little bit...Ok so put rims on all 4, no tires. Where am I measuring this 10.5mm at? Near the chassis or near the hubs?

[allan42r]

Originally Posted by Ponch

Ok what I got on there right now for preload f/r=6mm/3mm
And overall shock lenght, from screw head on bottom to bottom of threads on top, f/r=103mm/126mm.

I'll check how it sits in a minute.

ya lost me with the threads part. the shock end should b screwd all the way on and with the long gray springs your car should have 9 up front and 8 on the back. look at the plastic spacers they are marked 1,2,3,5,8