+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Open Forums (https://www.chitownrc.com/forum-5.html)
+--- Forum: Buy / Sell / Trade (https://www.chitownrc.com/forum-13.html)
+--- Thread: needed (/thread-5831.html)
needed - pwnzor - 01-29-2007
I was wanting to buy a 17mm truggy wheel wrench, I have bid on like 5 on E-bay and lose at the last dang minute every time.............let me know if you got a spare lying around, or if you can get one locally cheap, my LHS do not have them ( they dont have anything it seems ) thx guys
needed - DAVEC-NITRO-RS4 - 01-29-2007
Is this the type you want...like this one?
http://www.amainhobbies.com/product_info.php/products_id/2674
needed - mikeh - 01-29-2007
I have one or two of those cheap ones lying around.
needed - pwnzor - 01-29-2007
nah Dave, its like the deep well 17mm for half offset wheels, they came with the CrT, but i didnt get one...........Mike you got what i need bro?
needed - north_shore_racer - 01-29-2007
why wouldnt a ratchet with a 17mm socket work?
needed - pwnzor - 01-29-2007
sorry to be rude, but duh!! it will, but I dont want to lug around a heavy ass ratchet/socket in my box
needed - satoch - 01-29-2007
Dave is right. That one from HPI will work if you grind the outer diameter smaller on a bench grinder. That's the wrench I use on my Jammin wheels. I got tired of the heavy wrench and socket.
needed - Czech-it-Out Graphics - 01-29-2007
dude pick up one of the kyosho wheel wrenches, the ones that come with the kits its cheap and you dont have to grind anything down, works perfectly. I used to lug around the socket for the half offset wheels but screw that
needed - Czech-it-Out Graphics - 01-29-2007
dude pick up one of the kyosho wheel wrenches, the ones that come with the kits its cheap and you dont have to grind anything down, works perfectly. I used to lug around the socket for the half offset wheels but screw that
needed - mikeh - 01-29-2007
The one in the link that Dave posted is like the ones I have.
needed - pwnzor - 01-29-2007
ok...thx guys, I will get one somewhere
hey guys, I also need ofna part#40516 13t pinion gear
so if anyone can help, I appreciate it
needed - mikeh - 01-29-2007
Is that a 13t clutch bell?
needed - pwnzor - 01-29-2007
no Mike, its the small bevel pinior gear for x1cr/crt
needed - pwnzor - 01-29-2007
anyone????
needed - Czech-it-Out Graphics - 01-29-2007
bueller...buelller......bueller.....
needed - pwnzor - 01-29-2007
lmfao^^