Hey guys,
I just bought an LST with a picco .27. The tuning is out of whack and I would like a good starting setting that i can go from tuning wise. Any help would be appreciated.

Most motors now a days(factory stock I mean) are usually about 3-3.5 turns out on the high-end. Give it a try there and see if it starts...If it will, tune it from there so it's pig rich until it's fully broken in.

Now the low end, I don't know. Some recommend flush with the surrounding ring there. Others I've done had to be all the way up to 11 turns out. I think that was a .26 picco that was like that...all goofy.

It's already broken in. I just want to have a starting point. Thanks!

just start it up and go from there. Don't mess with the needles at all unless the last owner said it was not running.