Hi, today I will be reviewing the THS Pipe for the Revo...

Here is the pipe;



Very nice and shiny...

The pipe comes in a nice box.



It includes;

Pipe
Manifold
Unbent Hanger
Setscrew
2 Orange couplers
1 Black coupler
1 Long spring
3 Short springs
1 Exhaust deflector

All nicely packaged in bubble wrap.

Performance;

I don't really like this pipe. After running the stock pipe on my 3.3 for about a week I got this, and noticed no gain at all. I had to severely retune, and even then it didn't seem to pull as hard. Burnt up a couple of plugs also, but that was probably on tuning issues.

Looks;

Looks awesome, nice mirror finish.

Durability;

No dents, dings, or severly bent parts after some good hits. One thing though, the bottom of the pipe got some hits by the rocker screw. And while trying to bend the hanger, it snapped! I had to custom fab one out of spare linkages.

Cost;

For $50 shipped to your door for a stock performance pipe, not the greatest choice.

Final Thoughts;

Stick with your stock pipe for the 2.5/R, and for the 3.3, drill the stinger slightly larger on the stock pipe. The THS pipe offers nothing but looks and hassles.

i give u an A for effort

I thought effort started with an "E"?

wow thats completly opposite for me. I used my THS on my 2.5r, os .18tm, os.18tz, 3.3 and never had a single tunning problem because of the pipe. Noticable power gain throughout the power band. Il give ya 35 for it?

Yeah I could do $35...You want to just pick up at the RFTC on Friday practice? I'll have it on me.

After I do my "inspection" of the pipe il let you know. I just burned a gallon of fuel in like 5 days so I still gotta pick up more fuel now before this race so il have to see what money I got left over after entrance fee's, fuel to get to the track, ect.

Ok....Yeah I know what you mean I got to pay entry and pick up a new gallon too...

Second in line behind Ryan for it.

now when you say no severely bent parts, what is bent?

Like a stock revo manifold will get bent. This thing still goes straight across the chassis. I think I only had 2-3 tanks thru it, and then switched back.

Oh, I bent the pipe hanger a little though, it was soft linkage rod. Still works, I'll include it.

Ive never seen a stock manifold bend. After market ones do like my ths one but thats got to have close to a dozen gallons through it. At least 8-12

Oh, they bend easily is what I meant. You can bend the stock ones by hand.

Youve never bent a stock one before? One bad landing and they are done...

I kinked a stock one by landing sideways at Berwyn Bash. Somehow the pipe gets shoved sideways and pushes on the header. The header was kinked right in the bend, and the flared end was dented from the pipe smacking it.

I don't like big ramps anymore, but I don't like 'em any less, either.