|
|
|
||||
|
||||
|
Looking for cheap E/T-maxx parts (See inside) -
10-01-2005, 01:00 PM
Ok, decided to rebuild the maxx, so I need a few things.
I need; diffs full set of driveshafts spur Front bulkheads turnbuckles 4 widemaxx upper and lower arms (aka enough for front end) brake pads/rotor/plunger setup bumpers bumper mounts shock towers-f/r body posts f/r stock/cheap servos? steering knuckles with bearings skid plates Show me what'cha got. Used or new, I don't care as long as it's in good shape. Matt 
|
|
|
||||
|
||||
|
10-01-2005, 09:40 PM
full set of driveshafts........... Good condition, rears have a slight twist starting (but still good) missing the front trans output shaft
Front bulkheads....................I'll check, they might be rears 4 widemaxx upper and lower arms (aka enough for front end).....Full set RPM uppers 2- lowers 2- stock stock/cheap servos? 2- 2018 & 1-2055 steering knuckles with bearings.......................1- pair F/R Alum. bumpers and stock set also/ may neeed brackets. 1- complete 2-spd. trans w/ reverse ,w/ carbon fiber brake rotor and dual pads w/ springs I think I may have some alum. ACNC skids also I'll see what else I have...its all nearly new condition. Make an offer...
|
|
|
||||
|
||||
|
10-01-2005, 09:53 PM
Quote:
I'm interested in the 2055, and one 2018, axles, the bulks (if they are fronts), and the arms, the alum. skids, alum. bumpers, and the brake rotor and dual pads. So yeah, see what else you have and get back to me. Do you have any servo saver setups? I will be putting in a 645mg servo, and the stock saver must go. Would you consider trading the things I've listed for the roto start? It's in new condition, and if you wish I could throw in a one way bearing too. But first lets see what else you have 
|
|
|
||||
|
||||
|
10-01-2005, 09:57 PM
I also have these, in great condition.
  LMK
|
|
|
||||
|
||||
|
10-01-2005, 09:58 PM
Updated list...
2 RPM uppers / 2-stock (wide 2.5 style) 2 RPM lowers / 2- stock (wide 2.5 style) 1 front bumper (used/ no brackets) 1 front bumper new w/ brackets 1 rear bumper (used no brackets) 2 rear stock bulks 1 front stock bulk (FL) new 1 front stock bulk (FL) used 2 knuckles w/ bearings and pillow balls (new) 1 knuckle w/ pillow balls (no bearings) 1 stock front skid 1 ACNC front skid (bent) could be straightened) 1 ACNC rear skid 1 set Supermaxx stainless steel hinge pins (all brand new except for 2 slightly used, but perfect) 1 2055 servo (needs new case) only ran for 5 tanks 3 2018 servos (all need new cases) 2 w/ side ears broken...internals mint. 1 needs new wire 2 stock shock towers 2 diff cases (case only) 2 alum. bumpers 1 complete trans w/ reverse 1 complete brake set dual pads & CF brake rotor 1 full set (8) RC Raven dual rate springs (3-7.5lbs. silver)
|
|
|
||||
|
||||
|
10-01-2005, 09:59 PM
Cool, we're both on. Wanna go on the chat thingy?
|
|
|
||||
|
||||
|
10-01-2005, 10:05 PM
Also, do you have a spare motor with good compression that you would like to sell? What about a spur gear?
|
|
|
||||
|
||||
|
10-01-2005, 10:12 PM
I checked mapquest and you're about 45 minutes away...Not too bad.
|
|
|
||||
|
||||
|
10-01-2005, 10:22 PM
went into chatroom...
It took me a little while to update the list, let me know exactly what you want from the list and we'll work something out.
|
|
|
||||
|
||||
|
10-01-2005, 10:31 PM
2 RPM uppers / I'll take them
2 RPM lowers /I'll take them 1 ACNC front skid (bent) could be straightened) 1 ACNC rear skid 2 stock shock towers 1 stock front bumper Full set of driveshafts All right, I weeded out what I don't want. I sware, I'm done!!! 
|
|
|
||||
|
||||
|
10-02-2005, 10:34 AM
Talk to RobH, I think he has the FR bulkhead you need to match the FL I have.
|
|
|
||||
|
||||
|
10-02-2005, 11:53 AM
diffs- I have one-12
Front bulkheads-Gotcha there also-5 bumpers-Have these also-4 bumper mounts-have these also-4 shock towers-f/r-Have the pro .15 ones with body posts-4 for both skid plates-Have a NIP rear and a used front(might be the other way around)-7 Those are my prices, shipping will be 5, LMK ttothemaxx2@gmail.com or here
|
|
|
||||
|
||||
|
10-02-2005, 01:12 PM
hey t to the maxx2, I don't need anything else, I got everything lined up. If I find somthing else I need, I'll let you know. Thanks alot though. : )
|
|
|
||||
|
||||
|
11-15-2005, 11:55 PM
hey i was sitting here and this came up at the bottom of my post in the related threads section and obsessive RC i was wondering if u still had any of that stuff for sale if so please shoot me a pm with all the stuff u have and preices for each item individually, thanks!
John
|
