Quote:
Originally Posted by kevinF
first part is wrong.
you have to have both receiver and transmitter off, then hold the button on the receiver, turn on the receiver and wait untill it flashes constantly, then hold the transmitter button and then turn on radio and wait till that button flashes constntly, then let go off button and wait a few seconds for the lights to be solid green.
its in the manual meatwad
|
Kevin is correct. And if you want to set the fail safe to a specific position you'll need to hold the controls in that position while turning the Tx on, and keep them there until the light turns solid on the Rx.
I generally bind mine at half brake.
Its enough to slow the buggy down without burning the servo out.